You Searched For: Anthos Mikrosysteme GmbH


2,179  results were found

Sort Results

List View Easy View (new)
SearchResultCount:"2179"
Catalog Number: 10141-486
Supplier: Thermo Scientific


Description: Pore size: 0.45um. Diameter: 30mm. Low non-specific binding membrane with excellent chemical resistance. Use with biological or protein-based samples or HPLC sample preparation. Low extractables, good flow rate characteristics. For volumes up to 100mL.
Catalog Number: 66064-403
Supplier: Thermo Scientific


Catalog Number: 89239-418
Supplier: Thermo Scientific


Catalog Number: 89239-430
Supplier: Thermo Scientific


Description: Length (Metric): 250mm Pore Size: Non-porous Diameter: 4mm for Use With: HPLC
Catalog Number: 10044-380
Supplier: Thermo Scientific


Description: 8-425 thread finish. For narrow opening screw thread vials. High-quality, pure white silicone laminated to 0.005" red PTFE. Use when excellent resealing qualities are a must.
Catalog Number: 66030-420
Supplier: Thermo Scientific


Description: Clear, borosilicate glass. Fits varoius autosamplers. Polypropylene SepCap closures designed for easy syringe needle penetration and easy push-in pull-out from vial. Molded sealing ring secures sample containment. Capacity: 4ml. ODxLength: 15x45mm.
Catalog Number: 66011-206
Supplier: Thermo Scientific


Description: Chemical resistant PTFE is 0.010" thick and easily penetrated by syringe needles. For one time use only and are not resealable.
Catalog Number: 66030-580
Supplier: Thermo Scientific


Description: Pore size: 0.45um. Diameter: 17mm. For use with non-aqueous based and aggressive samples. Resistant to all solvents, acids, and bases. Very low in extractables and low non-specific binding. Can be used for volumes less than 10mL
Catalog Number: 66030-863
Supplier: Thermo Scientific


Description: All-plastic syringes with polypropylene barrels and polyethylene plungers. Syringe are non-sterile and packed in bulk. Two-part, all-plastic syringes with polypropylene barrels and both polyethylene and polypropylene plungers.
Catalog Number: 66064-756
Supplier: Thermo Scientific

Description: All-plastic syringes with polypropylene barrels and polyethylene plungers. Syringe are non-sterile and packed in bulk. Two-part, all-plastic syringes with polypropylene barrels and both polyethylene and polypropylene plungers.
Catalog Number: 66064-752
Supplier: Thermo Scientific


Description: All-plastic syringes with polypropylene barrels and polyethylene plungers. Syringe are non-sterile and packed in bulk. Two-part, all-plastic syringes with polypropylene barrels and both polyethylene and polypropylene plungers.
Catalog Number: 66064-754
Supplier: Thermo Scientific


Description: All-plastic syringes with polypropylene barrels and polyethylene plungers. Syringe are non-sterile and packed in bulk. Two-part, all-plastic syringes with polypropylene barrels and both polyethylene and polypropylene plungers.
Catalog Number: 66064-758
Supplier: Thermo Scientific


Description: A layer of 0.003" red PTFE on each side of medium durometer white silicone. Most resistant to coring with above average resealing characteristics.
Catalog Number: 66030-588
Supplier: Thermo Scientific


Description: Open-top. Offers excellent chemical durability. Preassembled with red PTFE-faced silicone liner. Liner is resealable for at least 20 punctures. GPI thread: 13-425.
Catalog Number: 66065-242
Supplier: Thermo Scientific


Catalog Number: 66065-240
Supplier: Thermo Scientific


1 - 16 of 2,179