Print…

You Searched For: Other Electrodes

TLC development tanks are constructed of sturdy glass with beveled edges to eliminate sharp hazards. Clear sides offer an unobstructed view of the developing tank contents. Different tanks are available with lids in a variety of styles, including latch, nonslip, and standard variants. Plate size compatibility varies between different models, with development tanks offered in both rectangular and cylindrical formats with varied internal dimensions. Some rectangular models feature a raised edge along the inside bottom to allow for the simultaneous development of two plates.

TLC development tanks are constructed of sturdy glass with beveled edges to eliminate sharp hazards. Clear sides offer an unobstructed view of the developing tank contents. Different tanks are available with lids in a variety of styles, including latch, nonslip, and standard variants. Plate size compatibility varies between different models, with development tanks offered in both rectangular and cylindrical formats with varied internal dimensions. Some rectangular models feature a raised edge along the inside bottom to allow for the simultaneous development of two plates.


37  results were found

Refine Results Sort by

Sort Results

List View Easy View (new)
SearchResultCount:"37"

Rate These Search Results

Product Image-14207-016

Developing Tank, TLC, Cylindrical, Screw Cap

Description: Plate Width x Length: 50mm x 100mm; Approxiamte Height: 120mm. Glass cylindrical developing chambers with flat bottom and molded plastic caps.
Catalog Number: 14207-016
Supplier: Wilmad-LabGlass
Product Image-14201-742

Developing Tank, TLC, Cylindrical, Screw Cap

Description: Plate Width x Length: 25mm x 75mm; Approxiamte Height: 95mm. Glass cylindrical developing chambers with flat bottom and molded plastic caps.
Catalog Number: 14201-742
Supplier: Wilmad-LabGlass
Product Image-21432-885

Round Developing Chamber

Description: For 5cm wide plates, accommodates two plates simultaneously. Uses 25ml of solvent for atmosphere saturation. 6.4diameterx23Hcm. Includes borosilicate glass jar and plastic snap-on cap.
Catalog Number: 21432-885
Supplier: General Glass Blowing
Product Image-21432-740

Multiplate Developing Chamber

Description: For TLC. Sturdy, molded clear glass block. Holds up to six 20x20cm plates. Chamber is 27Lx7.5Dx26Hcm. Includes jar, anodized aluminum rack, and nonslip lid with lifting knob.
Catalog Number: 21432-740
Supplier: General Glass Blowing
Product Image-80060-620

TLC TANK RACK, FLUOROPOLYMER RESIN COATED ALUMINUM

Description: TLC Tank Rack. fluoropolymer resin coated aluminum rack to fit either CG-1183 or CG-1184 TLC developing tank. Rack will hold six 20cmx20cmx1/8in. or twelve 20cmx20cmx1/16in. plates.
Catalog Number: 80060-620
Supplier: Chemglass

Small Business Enterprise


Product Image-KT416180-0000

TLC Rectangular Developing Tanks

Description: Clear, molded glass developing tank. Allows unobstructed photography or visual inspection of TLC plates. Complete with Standard Lid, drilled for #0 rubber stoppers for reagent pouring. Holds two 20x20cm, or four 5x20cm Plates.
Catalog Number: KT416180-0000
Supplier: DWK Life Sciences (KIMBLE)
Product Image-KT416185-0000

TLC Rectangular Developing Tanks

Description: Clear molded glass developing tank. Unobstructed photography or visual inspection of TLC plates. Complete with Non-slip Lid with PTFE retainers and lifting knob, drilled for #0 rubber stoppers for reagent pouring. Holds two 20x20cm, or four 5x20cm Plates.
Catalog Number: KT416185-0000
Supplier: DWK Life Sciences (KIMBLE)
Product Image-KT416190-0000

TLC Rectangular Developing Tanks

Description: Clear molded glass developing tank. Allows unobstructed photography or visual inspection of TLC plates. Latch Lid with PTFE retainers holds lid firmly to tank, drilled for #0 rubber stoppers for reagent pouring. Holds two 20x20cm, or four 5x20cm Plates.
Catalog Number: KT416190-0000
Supplier: DWK Life Sciences (KIMBLE)
Product Image-80060-614

TLC DEVELOPING TANK, LATCH-LID

Description: Replacement Latch-Lid Only. Heavy duty, molded TLC developing tank for use with plates up to 20x20cm (8in.x8in.). The weight of the tank is approximately 15 pounds and the bottom is ground to insure stability.
Catalog Number: 80060-614
Supplier: Chemglass

Small Business Enterprise


Product Image-80060-612

TLC DEVELOPING TANK, LATCH-LID

Description: Latch Lid-Tank, Complete. Heavy duty, molded TLC developing tank for use with plates up to 20x20cm (8in.x8in.). The weight of the tank is approximately 15 pounds and the bottom is ground to insure stability.
Catalog Number: 80060-612
Supplier: Chemglass

Small Business Enterprise


Product Image-KT416170-1121

TLC Cylindrical Developing Tank

Description: Cylindrical glass tank for the development of 5x10cm plates. Tank provides maximum vapor phase saturation with a minimal amount of solvent. Complete with polyethylene lid.
Catalog Number: KT416170-1121
Supplier: DWK Life Sciences (KIMBLE)

Certificates


Product Image-KT416170-1122

TLC Cylindrical Developing Tank

Description: Cylindrical glass tank for the development of 5x10cm plates. Tank provides maximum vapor phase saturation with a minimal amount of solvent. Complete with polyethylene lid.
Catalog Number: KT416170-1122
Supplier: Kimble Chase
Product Image-KT416170-1123

TLC Cylindrical Developing Tank

Description: Cylindrical glass tank for the development of 12.7x51cm plates. Tank provides maximum vapor phase saturation with a minimal amount of solvent. Complete with polyethylene lid.
Catalog Number: KT416170-1123
Supplier: DWK Life Sciences (KIMBLE)
Product Image-KT416170-1120

TLC Cylindrical Developing Tank

Description: Cylindrical glass tank for the development of 5x10cm plates. Tank provides maximum vapor phase saturation with a minimal amount of solvent. Complete with polyethylene lid.
Catalog Number: KT416170-1120
Supplier: DWK Life Sciences (KIMBLE)

Certificates


Product Image-KT416170-1119

TLC Cylindrical Developing Tank

Description: Cylindrical glass tank for the development of 2.54x7.6cm plates. Tank provides maximum vapor phase saturation with a minimal amount of solvent. Complete with polyethylene lid.
Catalog Number: KT416170-1119
Supplier: DWK Life Sciences (KIMBLE)
Product Image-KT416170-1020

TLC Cylindrical Developing Tank

Description: Cylindrical glass tank for the development of 10x20cm plates. Tank provides maximum vapor phase saturation with a minimal amount of solvent. Complete with glass lid.
Catalog Number: KT416170-1020
Supplier: DWK Life Sciences (KIMBLE)
1 - 16 of 37