Inlet Liners

The 2 mm dimpled liner to be used in the Agilent MultiMode Inlet when analyzing heavy matrix samples such as food or environmental extracts.

Direct Connect liners provide maximum recovery and minimal decomposition of active compounds for methods requiring splitless injection.

Flip-top inlet sealing system allows you to safely and reliably change an inlet liner in as little as 30 seconds,in a consistent leak-free manner.

Convenience kits are an easy way to get all the supplies you need using one part number.PM kits include septa, liners, O-rings, gold seals and traps.

Liner O-rings are used to form a proper seal around the outside of the inlet liner between the inlet weldment and the turn-top. O-rings are composed of either graphite or fluorocarbon material, graphite O-rings are used when operating inlet temperatures exceed 350^°C.

Split injections are intended for use with a split/splitless injection port in gas chromatography analysis.

The gold seal forms a leak-free seal with the bottom of the inlet body and column ferrule to minimize both sample contamination and sample loss

Choose a liner without glass wool if your sample contains nonvolatiles or analytes within a wide boiling range.

Agilent Ultra Inert inlet liners prevent adsorption and ensure accurate sample transfer onto the GC column through a robust deactivated surface.