You Searched For: CUBE BIOTECH


251  results were found

SearchResultCount:"251"

Sort Results

List View Easy View (new)

Rate These Search Results

Catalog Number: (77392-442)
Supplier: CUBE BIOTECH
Description: SMALP BZs are synthesized via RAFT polymerization, achieving a better-defined polymer size and a low dispersity.


Catalog Number: (77392-716)
Supplier: CUBE BIOTECH
Description: This product is a pre-assembled nanodisc. Its intended purpose is to stabilize a cell-free expressed membrane protein.


Catalog Number: (77392-820)
Supplier: CUBE BIOTECH
Description: Membrane scaffold protein; rat origin.


Supplier: CUBE BIOTECH
Description: AASTYs (Acrylic acid-co-styrenes) - like AASTY 11-55 - are highly alternating copolymers, well-suited for generating native lipid nanodiscs. They are a 2022 novel developed series for membrane protein solubilization & stabilization. AASTY 11-55 is named from its molecular weight and Acrylic Acid : Styrene Ratio. These varying ratios of acrylic acid to styrene contribute to the hydrophilic properties of our AASTYs. In general lighter AASTYs, like 6-45 tend to be more aggressive, while heavier AASTYs, such as 11-55 show higher thermodynamic stability.

The exact composition of AASTY copolymers shows different extraction efficiencies, depending on the lipid composition of the lipid bilayers being formulated into nanodiscs. As AASTY is made by controlled radical polymerization techniques, the dispersity of polymer molecular weight distribution is low, and the molecular weights are controlled. This means that excess AASTY copolymer can be removed by dialysis after nanodisc formation. Based on previous findings on SMA, it is the expectation that AASTY of different molecular weights will display different rates of nanodisc formation, extraction efficacy, and stability of resulting nanodiscs.

Every membrane protein solubilization needs to undergo a screening process before. The characteristic phospholipid environment surrounding the different membrane proteins in question performs differently well with each polymer. To support you in this process we offer a handy Screening Kit for AASTYs to test them all. Additionally, we recommend the two following publications if you would like to get further information: Smith et al. 2020 & Timcenko et al. 2022

Supplier: CUBE BIOTECH
Description: Elution of Rho1D4-tagged protein from matching purification beads.

Supplier: CUBE BIOTECH
Description: Phosphocholines, or Fos-cholines, are a novel class of detergents that is well suited for the solubilization, stabilization, and purification of membrane proteins. For screening of the best-suited detergent for a given application, we offer Fos-cholines with chain lengths from C-9 to C-16.

Supplier: CUBE BIOTECH
Description: Our PureCube Ni-NTA agarose resins are your best option to purify His-tagged protein using FPLC, Batch spin, or column chromatography.

Supplier: CUBE BIOTECH
Description: Glyco-DIBMA is a modified version of DIBMA with a sugar side-chain added to the polymer molecule. Its purpose is to enhance DIBMA's range for solubilizing membrane proteins. After solving the Glyco-DIBMA + buffer powder in water, the product is ready-to-use. It can primarily be used for all cell membrane hosts, including bacteria, yeast, and human cells. After successful solubilization of the membrane protein of interest, the protein can be purified using affinity chromatography. We recommend the Rho1D4-tag for membrane protein purification and offer matching products for this purpose. DIBMA / Nanodisc Screening: Each membrane protein may perform better or differently with certain synthetic polymers. This is due to the characteristic composition of phospholipids surrounding the membrane proteins. Therefore a screening process for the correct DIBMA/Polymer is required in before. For this purpose, we offer our synthetic nanodisc screening kit MAXI which contains DIBMA, AASTY, and SMA.

Catalog Number: (77392-730)
Supplier: CUBE BIOTECH
Description: This product is a pre-assembled nanodisc. Its intended purpose is to stabilize a cell-free expressed membrane protein.


Catalog Number: (77392-700)
Supplier: CUBE BIOTECH
Description: This product is a MSP nanodisc assembly kit. It contains a vial of lyophilized membrane scaffold protein MSP1D1 dh5 and a vial of DMPC or POPC phopshospholipid to assemble a MSP nanodisc.


Supplier: CUBE BIOTECH
Description: Our PureCube 100 Co-NTA agarose resins are agarose resin beads with a diameter of 100 µm. They are used for the purification of active His-tagged proteins from cells.

Catalog Number: (77392-734)
Supplier: CUBE BIOTECH
Description: This product is a pre-assembled nanodisc. Its intended purpose is to stabilize a cell-free expressed membrane protein.


Supplier: CUBE BIOTECH
Description: Decylmaltoside are well suited for the solubilization, stabilization, and purification of membrane proteins. For screening of the best-suited detergent for a given application, we offer maltosides with chain lengths from C-9 to C-13.

Supplier: CUBE BIOTECH
Description: Membrane scaffold protein.

Catalog Number: (77392-808)
Supplier: CUBE BIOTECH
Description: This product is a pre-assembled nanodisc. Its intended purpose is to stabilize a cell-free expressed membrane protein.


Catalog Number: (77392-810)
Supplier: CUBE BIOTECH
Description: This product is a pre-assembled nanodisc. Its intended purpose is to stabilize a cell-free expressed membrane protein.


Inquire for Price
Stock for this item is limited, but may be available in a warehouse close to you. Please make sure that you are logged in to the site so that available stock can be displayed. If the call is still displayed and you need assistance, please call us at 1-800-932-5000.
Stock for this item is limited, but may be available in a warehouse close to you. Please make sure that you are logged in to the site so that available stock can be displayed. If the call is still displayed and you need assistance, please call us at 1-800-932-5000.
In order to process your orders without delay, we request that you provide the required business documentation to purchase this product.

To order chemicals, medical devices, or other restricted products please provide identification that includes your business name and shipping address via email CMD_NA@vwr.com or fax 484.881.5997 referencing your VWR account number . Acceptable forms of identification are:

  • State issued document with your organization's Federal Tax ID Number
  • State issued document with your organization's Resale Tax ID Number
  • City or County issued Business License
  • State Department of Health Services License
  • Any other ID issued by the State that includes the business name and address

* Please note if your account is within the State of California two of these pieces of identification will be required.
VWR will not lift restrictions for residential shipping addresses.

-Additional Documentation May be needed to purchase this item. A VWR representative will contact you if needed.
This product has been blocked by your organization. Please contact your purchasing department for more information.
The original product is no longer available. The replacement shown is available.
This product is no longer available. Alternatives may be available by searching with the VWR Catalog Number listed above. If you need further assistance, please call VWR Customer Service at 1-800-932-5000.
161 - 176 of 251
no targeter for Bottom