Supplier: ADVANCED BIOMATRIX, INC. MS

Description: Advanced BioMatrix products are recognized for purity, functionality, quality, and lot-to-lot consistency, allowing for reproducibility in research.

Catalog Number: (103701-224)

Supplier: ADVANCED BIOMATRIX, INC. MS

Description: Advanced BioMatrix products are recognized for purity, functionality, quality, and lot-to-lot consistency, allowing for reproducibility in your research.

Sale

Catalog Number: (103701-194)

Supplier: ADVANCED BIOMATRIX, INC. MS

Description: Poly-D-Lysine is a synthetic amino acid chain that is positively charged and widely used as a coating to enhance cell attachment and adhesion to both plasticware and glass surfaces. This molecule is resistant to enzymatic degradation and has been used to culture a wide variety of cell types.
The molecular weight of Poly-D-Lysine can vary significantly with lower molecular weight (30,000 Da) being less viscous and higher molecular weight (>300,000 Da) having more binding sites per molecule. This product’s molecular weight ranges from 70,000 to 150,000 Da yielding a solution viscosity for easy handling while providing sufficient binding sites for cell attachment.

Poly-D-Lysine surface coatings are designed to improve cell attachment, growth and differentiation of many cell types. Coated surfaces will often improve cell attachment in reduced or serum-free conditions. Poly-D-Lysine is supplied in a sterile 5 mg package size.

Sale

Catalog Number: (103792-944)

Supplier: ADVANCED BIOMATRIX, INC. MS

Description: Sterile filtered, degassed, deionized water at pH 5.0-8.0. This product was designed and intended for use with the HyStem® family of thiolated hyaluronic acid products. 

Sale

Catalog Number: (103701-212)

Supplier: ADVANCED BIOMATRIX, INC. MS

Description: Use With Type I Collagen to help form 3D hydrogels.

Sale

Catalog Number: (103700-634)

Supplier: ADVANCED BIOMATRIX, INC. MS

Description: Type IV Collagen is the primary collagen found in the extracellular basement membranes separating a variety of epithelial and endothelial cells. It is a major component of the dermal-epidermal junction where it is mostly found in the lamina densa. It is a heterotrimeric molecule containing two Alpha 1-like and one Alpha 2-like chains.

This Type IV Collagen is isolated from human placenta and is purified using a multi-step process. The product is supplied as a non-sterile powder containing 5 mg of Type IV collagen per vial. A Certificate of Analysis is available with the purchase of each product.

Type IV Collagen is typically used as a thin coating on tissue culture surfaces. Specific instructions are found in the Directions for Use. This product is generally used in vitro as a substrate scaffold to enhance cell attachment, adherence and proliferation. Type IV collagen may be used to culture epithelial, endothelial, muscle, nerve and many other cell types. Additionally, this product is suitable for use as a substrate for collagenase assays and positive controls.

Sale

Supplier: ADVANCED BIOMATRIX, INC. MS

Description: HyStem®-C Hydrogel Kits - The starter matrix.

Catalog Number: (103701-216)

Supplier: ADVANCED BIOMATRIX, INC. MS

Description: NaOH is provided in a user-friendly packaging for use and storage. This product is sterile and supplied as a ready to use solution.

Sale

Catalog Number: (103792-914)

Supplier: ADVANCED BIOMATRIX, INC. MS

Description: PhotoGel®-LAP is a methacrylated gelatin kit. These 3D gelatin hydrogels can be prepared at various concentrations and photocrosslinked (405nm) to provide various gel stiffness. Each kit contains 1 gram (2 x 500 mg) of methacrylated gelatin and LAP photoinitiator.

Sale

Catalog Number: (103792-912)

Supplier: ADVANCED BIOMATRIX, INC. MS

Description: PhotoCol®-RUT is a methacrylated Type I collagen kit. These 3D collagen gels can be prepared at various concentrations and photocrosslinked (400-450nm) to provide various gel stiffness. Each kit contains 100mg of methacrylated collagen, ruthenium photoinitiator, acetic acid and a neutralization solution.

Sale

Catalog Number: (103700-640)

Supplier: ADVANCED BIOMATRIX, INC. MS

Description: PureCol® collagen is known as the standard of all collagens for purity (>99.9% collagen content), functionality, and the most native-like collagen available. PureCol® is isolated from bovine hides sourced from the only controlled, closed herd in the United States. Advanced BioMatrix’s manufacturing processes comply with stringent quality standards that have proven to yield unsurpassed lot-to-lot consistency.

PureCol® collagen is approximately 97% Type I with the remainder being comprised of Type III collagen. It is soluble atelo-collagen. It contains high monomer content as measured by gel permeation chromatography.

This product is supplied as a lyophilized powder with 15 mg of bovine collagen. When reconstituted with 5 ml of sterile 0.01 N HCl, a concentration of approximately 3 mg/ml is achieved.

PureCol® collagen is ideal for coating of surfaces and providing preparations of thin layers for culturing cells. PureCol®, lyophilized form is not recommended for the formation of a solid gel. PureCol® collagen is provided in user-friendly packaging for use and storage. This product is supplied as a sterile lyophilized powder.

Sale

Catalog Number: (103701-726)

Supplier: ADVANCED BIOMATRIX, INC. MS

Description: Advanced BioMatrix products are recognized for purity, functionality, quality, and lot-to-lot consistency, allowing for reproducibility in research.

Sale

Catalog Number: (103701-188)

Supplier: ADVANCED BIOMATRIX, INC. MS

Description: Type III Collagen provides structure and strength to connective tissue, is found many places in the body, especially skin, lung, intestinal walls and the walls of blood vessels. Collagen III is initially produced as procollagen, a protein consisting of three pro-alpha1(III) chains that form the triple-stranded, rope-like molecule. After being synthesized, the procollagen molecule is modified by the cell. Enzymes modify the amino acids lysine and proline in the protein strands by adding chemical groups that are necessary for the strands to form a stable molecule and then later to crosslink to other molecules outside the cell. The Type III procollagen molecules are released from the cell and are processed by enzymes that clip small segments off either end of the molecules to form mature collagen. The mature collagen molecules assemble into fibrils. Cross-linking between molecules produces a very stable fibril, contributing to collagen’s tissue strengthening function.

This Type III Collagen product is isolated from human placenta and is purified using a multi-step process with approximately 85% Type III collagen with the remainder being comprised of Type I collagen. The product is supplied as a sterile solution with 10 mg at approximately 1 mg/ml in 0.01 N HCl, pH 2. A Certificate of Analysis is available with the purchase of each product. Type III collagen product is provided in a user-friendly packaging for use and storage. This Type III collagen product is sterile filtered and is supplied as a ready to use solution.

Type III Collagen is typically used as a thin coating on tissue culture surfaces or as a control. Specific instructions are found in the Directions for Use. This product is generally used in vitro as a substrate scaffold to enhance cell attachment, adherence and proliferation. Type III collagen may be used to culture a variety of cell types.

Sale

Supplier: ADVANCED BIOMATRIX, INC. MS

Description: Polyethylene Glycol Diacrylate (PEGDA) is a 3500 MW blank slate hydrogel that gels rapidly at room temperature in the presence of a photoinitiator and light. PEGDA is hydrophilic, elastic and can be customized to include a variety of biological molecules.

Catalog Number: (103701-200)

Supplier: ADVANCED BIOMATRIX, INC. MS

Description: Tropoelastin is the precursor to the elastin molecule. Elastin is found in many tissues of the body including the skin, arterial walls and ligaments. Elastin confers strength and elasticity to tissues and organs.

Tropoelastin is not normally available in its native state since it becomes cross-linked immediately after its synthesis by the cell, during its export into the extracellular matrix.

This tropoelastin is produced using recombinant production methods. The product is supplied as a sterile, lyophilized powder containing 1 mg per vial. A Certificate of Analysis is available with the purchase of each product.

Tropoelastin is typically used as a thin coating on tissue culture surfaces. Specific instructions are found in the Directions for Use. This product is generally used in vitro as a substrate scaffold to enhance cell attachment, adherence and proliferation.

Sale

Supplier: ADVANCED BIOMATRIX, INC. MS

Description: Advanced BioMatrix products are recognized for purity, functionality, quality, and lot-to-lot consistency, allowing for reproducibility in research.