You Searched For: Cepheid


142  results were found

Sort Results

List View Easy View (new)
SearchResultCount:"142"
Description: FCS2 controller, An electronic controller used with the FCS2 chamber to maintain uniform temperature from ambient to 50 degrees C. with 12VDC Power supply.
Catalog Number: 10200-008
Supplier: BIOPTECHS INC.


Description: Objective themal isolator 25mm, A 9mm thick internally and externally threaded polymer ring, includes an AR window to enable a dry air trap to prevent condensation on cooled objectives. Fits 25mmx0.75mm objectives
Catalog Number: 10199-802
Supplier: BIOPTECHS INC.


Description: Microaqueduct slide, A 40mm diameter, 1mm thick glass circle with an ITO coating on the outer surface, having two port holes and micro aqueduct grooves in it to facilitate laminar flow perfusion in a Bioptechs FCS2 or FCS3 chamber.
Catalog Number: 10200-058
Supplier: BIOPTECHS INC.


Description: Delta T Open Dish System, Easily adapted to specimen, Low mass to thermo-regulate, incubate and observe without the need to transfer cellsFast thermal recovery after perfusion (within seconds), Compatible with inverted and upright microscope stands
Catalog Number: 10199-706
Supplier: BIOPTECHS INC.


Description: Objective thermal isolator 27mm, A 9mm thick internally and externally threaded polymer ring, fitted with an AR window and enable a dry air trap to prevent condensation on cooled objectives. Fits 25mmx0.75mm objectives
Catalog Number: 10199-804
Supplier: BIOPTECHS INC.


Description: Delta T culture dish, clear, A 35mm diameter, 0.17mm Desag 263 German glass coverslip bottomed culture dish for high applications that heats the dish contents through an electrically conductive, optically transparent.
Catalog Number: 10199-954
Supplier: BIOPTECHS INC.


Description: Gasket, Rectangular, flat 40mm diameter 0.75mm thick silicone sheet having a 14x22mm rectangular hole in the center to facilitate perfusion in a FCS2 or FCS3 chamber, 0.75mm, 5per pack
Catalog Number: 10200-078
Supplier: BIOPTECHS INC.


Description: Interchangeable Coverslip Dish Heated Lid, An O-ring sealed stainless steel insert equipped with a heated glass window to prevent condensation, includes a gas flow port and allows trans-illumination on an inverted microscope.
Catalog Number: 10199-872
Supplier: BIOPTECHS INC.


Description: FCS2 low dead volume top, The white top portion of a FCS2 that is equipped with 0.5mmports instead of the standard 1.5mm ports to reduce the amount of dead volume between the supply tubing and to the optical cavity where the cells reside for imaging.
Catalog Number: 10200-024
Supplier: BIOPTECHS INC.


Description: Perfusion adapter set, kit of 1/16in tubing barbs and connectors that enable connection to FCS2 or FCS3 chambers. Includes: (2) Tee Adapter, (2) Male Luer Taper Adapter to 1/16in Tubing, (2) Female 1/16in Tubing to Luer Adapter, (1) Two-way Valve
Catalog Number: 10200-108
Supplier: BIOPTECHS INC.


Description: Delta T Culture Dish, 0.5mm thick (clear), 35mm diameter, 0.5mm Desag 263 German glass coverslip bottomed, optically transparent coating on the bottom surface of the dish.
Catalog Number: 10199-772
Supplier: BIOPTECHS INC.


Description: Objective thermal isolator RMS, A 9mm thick internally and externally threaded polymer ring includes an AR window to enable a dry air trap to prevent condensation on cooled objectives. For RMS, 0.8inchx36tpi
Catalog Number: 10199-800
Supplier: BIOPTECHS INC.


Description: Stable Z nikon stage adapter, A glass 108mm round plate having an electronically heated metal plate in its center that fits a Nikon microscope stage where biological specimens are placed for observation and having the ability to not induce Z axis drift to the specimen.
Catalog Number: 10199-842
Supplier: BIOPTECHS INC.


Description: FCS2 single Silicon tubings with molded ends to fit the Micro-Perfusion Pump. Delivers flow rate of 125 - 1250 ul/minute for low flow pump, 10 - 100 ul/minute for Ultra low flow, and 0.9 - 9 ml/minute for high flow, Package of 4, 0.062in internal diameter
Catalog Number: 10200-100
Supplier: BIOPTECHS INC.


Description: Stable lab-tek warming adapter, A 127.76mmx85.48mm glass plate having an electronically heated metal plate in its center that accepts Lab-Tek* chamber slides and fits microscope stages adapted for 96 well SLAS/SBS plates that does not induce Z axis drift to the specimen plane
Catalog Number: 10199-850
Supplier: BIOPTECHS INC.


Description: Stable Z SBS stage adapter, A 127.76mmx85.48mm glass plate having an electronically heated metal plate in its center that accepts 35mm dishes and fits microscope stages adapted to hold 96 well SLAS/SBS plates that does not induce Z axis drift to the specimen
Catalog Number: 10199-846
Supplier: BIOPTECHS INC.


17 - 32 of 142