You Searched For: JBT Jumbotainer Verpackungs GmbH


306  results were found

Sort Results

List View Easy View (new)
SearchResultCount:"306"
Description: Filter, for Volatiles, Washed and Dried Only, 1,5 micron, binderless Borosilicate Glass Fiber for VSS (Volatile Suspended Solids) analysis, analysis by Standard Methods 2540, Each filter has been washed 3 times with DI Water then dried to 550 degrees Celsius, Size: 47mm
Catalog Number: 76436-902
Supplier: Environmental Express


Description: Filtration System, Material: PES/PTFE, Pore Size: 0.45um, Bring the sample to volume, Thread the FlipMate 50 Assembly onto the cup containing the sample and tighten, Thread an additional 50mL digestion cup onto the FlipMate 50. Tighten securely, Volume: 50 mL
Catalog Number: 76437-036
Supplier: Environmental Express


Description: Filteration system, Pore Size: 0.45um, Material: PVDF, with pre-filter, 100pk
Catalog Number: 76437-022
Supplier: Environmental Express


Description: Filtration system, Material: PES, with pre-filter, 0.2um, quick and effective method of filtering up to 125mL of sample, device accepts two threaded SC490 sample cups- one containing sample to be filtered and empty cup to receive the filtrate, flipped over and vacuum is applied, Size: 100 ml
Catalog Number: 76437-006
Supplier: Environmental Express


Description: Digestion Cup Holder, machined HDPE fixture adds stability when performing FilterMate filtrations, sample cup is placed into the center hole of the FilterMate holder prior to filtration, holder secures the digestion cup as the FilterMate is depressed through the liquid sample, Volume: 50 ml
Catalog Number: 76437-034
Supplier: Environmental Express


Description: Block gray foam 72 cells 16 x 8 x 3.5 for 40ml vials
Catalog Number: 89202-850
Supplier: Environmental Express

Small Business Enterprise


Description: Tube rack, SimpleDist, polycarbonate transfer rack fits C6000 Simple Cyanide System, Size: 12-Place
Catalog Number: 76436-826
Supplier: Environmental Express


Description: Tubing, Material: silicone rubber, available if you need a custom length or prefer to cut your own tubing, Size: 3/8 in OD x 1/4 in ID, 25ft length
Catalog Number: 76436-842
Supplier: Environmental Express


Description: Tubing Kit, come with 12 lengths of tubing. Six pieces of tubing are 8 in and the other 6 are 10.25in, The longer pieces extend from manifold valves to the front row of sample collection flasks while the shorter lengths go to the back row of flask, pre-inserted into one end of each length of tubing
Catalog Number: 76436-840
Supplier: Environmental Express


Description: Port cap insert, unique two-port cap insert fits snugly into the open-top screw cap, features a luer taper design to connect collection trap to boiling flask, Disposable acid addition tubes with funnel tops (C6110) slide easily but firmly into boiling flask through the additional port, Size: Two
Catalog Number: 76436-836
Supplier: Environmental Express


Description: Collection trap, SimpleDist, For use with SimpleDist Systems, these disposable polystyrene collection traps are clearly marked and have a built-in vent tube that makes pouring the final solution safe and easy, Size: 25ml
Catalog Number: 76436-828
Supplier: Environmental Express


Description: Washer, for 38mm open-top screw caps provide a tight, leak-resistant seal
Catalog Number: 76436-834
Supplier: Environmental Express


Description: Tubing adaptor, narrow end of the tubing adaptor fits tightly into 1/4 in ID tubing while the larger open end fits securely onto the top of the cyanide trap
Catalog Number: 76436-838
Supplier: Environmental Express


Description: Open top enclosure, Polypropylene open-top screw caps fit tightly onto the borosilicate glass boiling tubes, Two-port cap inserts are sold separately, Size: 38mm
Catalog Number: 76436-832
Supplier: Environmental Express


Description: Reagent addition tube, with funnel tip, Disposable polypropylene acid addition and inlet tubes with funnel tips replace fragile glass tubing in traditional systems. The tubes slide easily but firmly into the boiling flask through the two-port cap insert
Catalog Number: 76436-830
Supplier: Environmental Express


Description: BOD Overcap, use of a cap over the mouth of a the BOD bottle to prevent evaporation is recommended by Standard Methods, Our overcaps are made of polyethylene and fit snugly against the rim and shoulder of our disposable BOD bottles, These overcaps do NOT fit the glass BOD bottles, for Bottle
Catalog Number: 76436-870
Supplier: Environmental Express


289 - 304 of 306