You Searched For: ELDEX CORPORATION


0  results were found

Sort Results

List View Easy View (new)
SearchResultCount:"0"
Description: All-plastic syringes with polypropylene barrels and polyethylene plungers. Syringe are non-sterile and packed in bulk. Two-part, all-plastic syringes with polypropylene barrels and both polyethylene and polypropylene plungers.
Catalog Number: 66064-758
Supplier: Thermo Scientific


Description: All-plastic syringes with polypropylene barrels and polyethylene plungers. Syringe are non-sterile and packed in bulk. Two-part, all-plastic syringes with polypropylene barrels and both polyethylene and polypropylene plungers.
Catalog Number: 66064-756
Supplier: Thermo Scientific

Description: All-plastic syringes with polypropylene barrels and polyethylene plungers. Syringe are non-sterile and packed in bulk. Two-part, all-plastic syringes with polypropylene barrels and both polyethylene and polypropylene plungers.
Catalog Number: 66064-752
Supplier: Thermo Scientific


Description: All-plastic syringes with polypropylene barrels and polyethylene plungers. Syringe are non-sterile and packed in bulk. Two-part, all-plastic syringes with polypropylene barrels and both polyethylene and polypropylene plungers.
Catalog Number: 66064-754
Supplier: Thermo Scientific


Description: Chromatography vial closure, PE, Snap-It Cap with 6 mm Hole, Septum: White Virgin PTFE, Thickness 0.25 mm
Catalog Number: 66030-580
Supplier: Thermo Scientific


Description: Syringe filter, Target®, Membrane Material: PTFE, Pore Size: 0.45 µm, Ø: 17 mm
Catalog Number: 66030-863
Supplier: Thermo Scientific


Description: Chromatography vial closure, Phenolic, Open-top screw cap, Septum: Red PTFE/white silicone
Catalog Number: 66065-242
Supplier: Thermo Scientific


Description: A layer of 0.003" red PTFE on each side of medium durometer white silicone. Most resistant to coring with above average resealing characteristics.
Catalog Number: 66030-588
Supplier: Thermo Scientific


Description: All-plastic syringes with polypropylene barrels and polyethylene plungers. Syringe are non-sterile and packed in bulk. Two-part, all-plastic syringes with polypropylene barrels and both polyethylene and polypropylene plungers.
Catalog Number: 66064-762
Supplier: Thermo Scientific


Catalog Number: 66065-240
Supplier: Thermo Scientific


Description: Highest quality medium durometer red rubber with a thin (0.015") layer of clear PTFE. Used for primarily for routine analysis. Offer moderate resealability and excellent chemical inertness.
Catalog Number: 66030-572
Supplier: Thermo Scientific


Description: Open-top. Polypropylene screw cap has a 8-425 GPI thread finish. Accepts 8mm septa (see 66011-188) . For use with 2mL glass autosampler vials (see 66001-236, -239).
Catalog Number: 66030-412
Supplier: Thermo Scientific


Description: 8-425 thread finish. For narrow opening screw thread vials. High-quality, pure white silicone laminated to 0.005" red PTFE. Use when excellent resealing qualities are a must.
Catalog Number: 66030-420
Supplier: Thermo Scientific


Description: Clear, borosilicate glass. Fits varoius autosamplers. Polypropylene SepCap closures designed for easy syringe needle penetration and easy push-in pull-out from vial. Molded sealing ring secures sample containment. Capacity: 4ml. ODxLength: 15x45mm.
Catalog Number: 66011-206
Supplier: Thermo Scientific


Description: Pre-assembled caps with septa.
Catalog Number: 66064-312
Supplier: Thermo Scientific


Description: Chromatography vial closure, Screw Caps, 20-400, PTFE/PE Foam Liner
Catalog Number: 66030-779
Supplier: Thermo Scientific


177 - 0 of 0