You Searched For: IDEX HEALTH & SCIENCE LLC.


87  results were found

Sort Results

List View Easy View (new)
SearchResultCount:"87"
Description: Stator face asembly for Rheodyne Model 7125.
Catalog Number: 50806-968
Supplier: Rheodyne


Description: RheFlex fittings provide inert nonmetal connections to 10-32 internal thread ports, including all Rheodyne injectors, valves and sample loops. The 1.5mm fitting will hold PEEK, stainless steel and titanium tubing to 5000 psi. Set contains 5 nuts and 5 ferrules.
Catalog Number: 50806-930
Supplier: Rheodyne


Description: Ferrules for use with RheFlex* PEEK* fittings.
Catalog Number: 50807-520
Supplier: Rheodyne


Description: Tefzel rotor seals for use with Rheodyne Model 7000, 7010, 7010-087, and 7040 injectors and switching valves. Operating pH range from0 - 14.
Catalog Number: 50806-942
Supplier: Rheodyne


Description: For use with HPLC 4.6mm Column Inlet Filter. Assembly, Model 7315. Particle filter for use between the injector and column.
Catalog Number: 50806-987
Supplier: Rheodyne


Description: Designed for Rheodyne models 9125, 9725, and 9010 PEEK injectors. Loops are supplied with unswaged fitting so that the tube may be completely bottomed in the injector port before the ferrule is swaged on. Bore Size: 0.51mm. Accuracy: 21%. Bore Tolerance: +-0.05mm.
Catalog Number: 50807-104
Supplier: Rheodyne


Description: Designed for Rheodyne models 9125, 9725, and 9010 PEEK injectors. Loops are supplied with unswaged fitting so that the tube may be completely bottomed in the injector port before the ferrule is swaged on. Bore Size: 0.18mm. Accuracy: 65%. Bore Tolerance: +-0.05mm.
Catalog Number: 50807-516
Supplier: Rheodyne


Description: Designed for Rheodyne models 9125, 9725, and 9010 PEEK injectors. Loops are supplied with unswaged fitting so that the tube may be completely bottomed in the injector port before the ferrule is swaged on. Bore Size: 0.51mm. Accuracy: 21%. Bore Tolerance: +-0.05mm.
Catalog Number: 50807-108
Supplier: Rheodyne


Description: Designed for Rheodyne model 7010 and 7125 injectors. Loops are supplied with unswaged fitting so that the tube may be completely bottomed in the injector port before the ferrule is swaged on. Bore Size: 0.76mm. Accuracy: 5%. Bore Tolerance: +-0.025mm.
Catalog Number: 50806-958
Supplier: Rheodyne


Description: Designed for Rheodyne model 7010 and 7125 injectors. Loops are supplied with unswaged fitting so that the tube may be completely bottomed in the injector port before the ferrule is swaged on. Bore Size: 0.18mm. Accuracy: 30%. Bore Tolerance: +-0.025mm.
Catalog Number: 50806-946
Supplier: Rheodyne


Description: Designed for Rheodyne model 7010 and 7125 injectors. Loops are supplied with unswaged fitting so that the tube may be completely bottomed in the injector port before the ferrule is swaged on. Bore Size: 0.76mm. Accuracy: 5%. Bore Tolerance: +-0.025mm.
Catalog Number: 50806-960
Supplier: Rheodyne


Description: Two-position six-port stainless steel valve with a double three-way switching pattern. Accepts 1.5mm ( 1/16") fittings.
Catalog Number: 50807-124
Supplier: Rheodyne



Description: Genuine replacement parts for Rheodyne 9010 and 9040 Injection Valves. Kit includes a standard rotor seal, stator face assembly, isolation seal, two hex keys, operating instructions and mini-manual.
Catalog Number: 50807-560
Supplier: Rheodyne


Description: Genuine replacement parts for Rheodyne 7750 TPMV Injection Valves. Includes a standard rotor seal, stator face assembly, isolation seal, needle guide, needle port cleaner, two hex keys, operating instructions and mini-manual.
Catalog Number: 50807-556
Supplier: Rheodyne


Description: Genuine replacement parts for Rheodyne 8125 and 8126 Injection Valves. Includes a standard rotor seal, stator face assembly, isolation seal, needle guide, needle port cleaner, two hex keys, operating instructions and mini-manual.
Catalog Number: 50807-558
Supplier: Rheodyne


49 - 64 of 87