You Searched For: Kubota Brabender Technologie GmbH

Description: Capillary instalation gauge, for gas chromatography, Prevents crushed column ends, Stainless-steel, For 1/16 in. ferrule fittings

Catalog Number: 10803-248

Supplier: Restek

Sale

Description: Visually observe the press-tight connection between the column end and liner. Fits 0.32 and 0.53mm ID capillary columns (fits column ODs from 0.5mm to 0.8mm). Slotted top prevents obstruction of carrier gas flow. Two designs are available.

Catalog Number: RK20343

Supplier: Restek

SDS Sale

Description: Tubing, Welded/Drawn, Rinsed and Cleaned, Material: Instrument-Grade 304 Grade Stainless Steel, Inner Diameter: 0.03 inch, Outer Diameter: 1/16inch, Application: for prov X ing carrier, fuel, make-up, or auxiliary gases to laboratory instruments, Unit: 100 feet roll

Catalog Number: 10855-048

Supplier: Restek

Sale

Description: Rtx-1 Capillary Column, (fused silica), nonpolar phase; Crossbond* dimethyl polysiloxane, Length: 60m, ID: 0.32mm, Film Thickness: 0.25um, with 5m, 0.32mm ID Integra Guard, Long lifetime and very low bleed at high operating temperatures, Equivalent to USP G1, G2

Catalog Number: 10850-628

Supplier: Restek

Sale

Description: Calibration standard Q-BOND and U-BOND Column Test Mix, 7 components, Concentration: 0.1% vol/vol each in heptane, Shelf Life: 6 months, Volume: 1 mL/ampule

Catalog Number: 75835-356

Supplier: Restek

Sale

Description: 0.25mm ID. 60Meters Length. 0.10um. Ideal for the analysis of solvents and petrochemicals. Available in Unbreakable Silcosteel (MXT )tubing. Thermally stable to 360[degree]C (MXT stable to 400[degree]C). Similar to DB-1, SPB-1, HB-1, and ultra-1 phases.

Catalog Number: RK10111

Supplier: Restek

Sale

Description: Stabilwax* Capillary Column (fused silica) (polar phase; Crossbond* polyethylene glycol) Temp. Limits: 40 to 250/260 C 10m Length, 0.10mm internal DiameterID, 0.10um df

Catalog Number: 10059-546

Supplier: Restek

Sale

Description: Capillary Dedicated FID Replacement Jet, High-Performance Siltek Treated, 0.011-Inch ID Tip, for Agilent 5890/6850/6890/7890 GCs, Length: 43 mm

Catalog Number: 10855-908

Supplier: Restek

Sale

Description: Viva C4 Guard Cartridge, spherical, Particle Size: 5um, size: 10 x 2.1mm, Pore size: 300 Angstrom, Managing High Backpressure, Guard column requires Trident direct guard cartridge system

Catalog Number: 10840-374

Supplier: Restek

Sale

Description: Pinnacle* DB PFP Propyl Column (USP L43) pH range: 2.5 to 8, temperature limit: 80 C, end-cap: yes, pore size: 140 A, carbon load: 6%, phase category: fluorophenyl propyl Particle Size 3um, 100x2.1mm (LengthxID)

Catalog Number: 10059-910

Supplier: Restek

Sale

Catalog Number: RK24051

Supplier: Restek

Sale

Description: Grad Passive Air Sampling Kit, Flow Capacity: 300 mL/min, Orifice Size: 0.0080in, Material: Siltek-Treated, Use with 1, 3, 6 L canisters, Connect 1/4in compression fitting directly to canister valve inlet, Replaceable frit protects orifice and valve from particulates

Catalog Number: 10862-588

Supplier: Restek

Sale

Description: Standard Calibration Mix no.2 508.1, 11 components, Concentration: 500 ug/mL each in ethyl acetate, Minimum shelf life: 6 months, Volume: 1ml/ampule

Catalog Number: 75834-224

Supplier: Restek

Sale

Description: Double Taper Inlet Liner, 3.5 mm, For 17A, 2010, and 2014 Gas chromatography equipped with split and splitless inlets, 95 mm, 5.0 mm, Borosilicate Glass

Catalog Number: 10803-280

Supplier: Restek

Sale

Catalog Number: 10058-838

Supplier: Restek

Sale

Description: Viva Biphenyl Column, Particle size: 5um, Spherical, Pore Size: 300A, Length: 250mm, ID: 4.6mm, Carbon Load: 7%, pH: 2.5 to 8, Temperature: 80 deg C, USP Phase Code: L11, Phase Category: Phenyl, Ligand Type: Unique Biphenyl, Application: Separating peptide or proteins

Catalog Number: 10840-114

Supplier: Restek

Sale