You Searched For: Kubota Brabender Technologie GmbH

Description: HPLC column, Roc Silica, 10 x 4.0mm, Pore size: 100A, Ideal for a wide range of applications from food to pharma; 5 phases cover 98% of USP methods, Solid and reliable for any 400 bar HPLC system

Catalog Number: 75846-104

Supplier: Restek

Sale

Catalog Number: RK80211-810

Supplier: Restek

Sale

Description: Reducing Ferrule, Fits Column ID: 0.25 mm, Ferrule ID: 0.8 mm, Material: VG1, 85% Vespel/15% Graphite, Fitting Size: 1/8in, Seal with minimal torque, reusable, and preferred for vacuum and high-pressure uses, Stable to 400 deg C, For mass spectroscopic transfer lines

Catalog Number: 10852-534

Supplier: Restek

Sale

Description: Scott/Air Liquide Transportable Pure Gases and Mixtures, for purging or calibrating to multicomponent mixes, Nitrogen in helium (100 ppm), Grade: Blend tolerance: +/-10%; Analytical accuracy: +/-5%, Pressure: 240 psig (17 bar), Size: 14L

Catalog Number: 75795-178

Supplier: Restek

SDS Sale

Description: Replacement Orifice, Non-Siltek, Flow Capacity: 30-80 mL/min, Orifice Size: 0.0060in, Material: Stainless Steel, Use these orifices with a Veriflo* 423XL flow controller to change the flow range for alternative sampling times.

Catalog Number: 10862-548

Supplier: Restek

Sale

Description: Visually observe the press-tight connection between the column end and liner. Fits 0.32 and 0.53mm ID capillary columns (fits column ODs from 0.5mm to 0.8mm). Slotted top prevents obstruction of carrier gas flow. Two designs are available.

Catalog Number: RK20788

Supplier: Restek

Sale

Catalog Number: RK31615

Supplier: Restek

SDS Sale

Description: Calibration standard Cyclohexane, USB stock solution, CAS no:110-82-7, Concentration: 19.4 mg/mL in dimethyl sulfoxide, Storage: 0 deg C or colder, Shelf Life: 6 months, Volume: 1 mL/ampule

Catalog Number: 75835-476

Supplier: Restek

Certificates Sale

Description: 0.32 mm ID. 15-Meter Length. 0.50um. Ideal for the analysis of free acids(no need for derivatization). High thermal stability(250[degree]C)and long column lifetime. Crossbond technology results in reduced bleed, increased column lifetime, and solvent rinsability.

Catalog Number: RK11036

Supplier: Restek

Sale

Description: Ferrule ID: 0.5mm, Material: Graphite, Fitting Size: 1/16inch, Fit 0.32mm ID Fused Silica Column

Catalog Number: 10057-902

Supplier: Restek

Sale

Description: Ultra Silica Column 5um 100 A 100 mm 2.1 mm pH range: 2.5 to 8, temperature limit: 80 C phase category: bare silica

Catalog Number: 10059-590

Supplier: Restek

Sale

Description: Drilled Uniliner with Hole near Top, for PerkinElmer Auto SYS GCs equipped with split/splitless inlet, Length: 92.1 mm, OD: 6.2 mm, Liner ID: 4.0 mm, Deactivation: Topaz Technology, Material: Borosilicate Glass,

Catalog Number: 75878-298

Supplier: Restek

Sale

Description: SV Mix, Tri-N-Propyltin Chloride standard, CAS no: 995-25-5, Concentration: 2000Ug/Ml,Methylene Chloride, Shelf Life: 6 Months, Storage: 10 deg C or colder, Volume: 1Ml/Ampule

Catalog Number: 75834-708

Supplier: Restek

Sale

Description: O-Ring, Material: Graphite, Maximum Temperature: 450 deg C, Fits 4 mm OD liner, for PerkinElmer Auto SYS XL or Clarus gas chromatography With PSS Injector

Catalog Number: 10852-580

Supplier: Restek

Sale

Description: Ultra-High-Purity Regulator, with CGA Fittings, Material: Stainless Steel, Type: Single-Stage, Fittings: CGA 580 (N2, He, Ar), Outlet Gauge: 30inch, 0 to 200 psig (0–1,379 kPa), Outlet Pressure: 0 to 150 psig (0–1,034 kPa)

Catalog Number: 10855-622

Supplier: Restek

Sale

Description: Intermediate-Polarity Deactivated Guard/Retention Gap Columns/Transfer Lines, fused silica, Length: 10M, ID: 0.32mm, Tested with a comprehensive test mix to ensure high inertness. Maximum temperature: 325 deg C.

Catalog Number: 10849-400

Supplier: Restek

Sale