You Searched For: Anthos Mikrosysteme GmbH

Description: Pre-assembled caps with septa.

Catalog Number: 66064-312

Supplier: Thermo Scientific

Sale

Description: The broad chemical resistance of PTFE on film / foam backing is the ultimate closure for glass. Not autoclavable.

Catalog Number: 66030-779

Supplier: Thermo Scientific

Sale

Description: All-plastic syringes with polypropylene barrels and polyethylene plungers. Syringe are non-sterile and packed in bulk. Two-part, all-plastic syringes with polypropylene barrels and both polyethylene and polypropylene plungers.

Catalog Number: 66064-754

Supplier: Thermo Scientific

Sale

Description: Highest quality medium durometer red rubber with a thin (0.015") layer of clear PTFE. Used for primarily for routine analysis. Offer moderate resealability and excellent chemical inertness.

Catalog Number: 66030-572

Supplier: Thermo Scientific

Sale

Description: Open-top. Polypropylene screw cap has a 8-425 GPI thread finish. Accepts 8mm septa (see 66011-188) . For use with 2mL glass autosampler vials (see 66001-236, -239).

Catalog Number: 66030-412

Supplier: Thermo Scientific

Sale

Description: A layer of 0.003" red PTFE on each side of medium durometer white silicone. Most resistant to coring with above average resealing characteristics.

Catalog Number: 66030-588

Supplier: Thermo Scientific

Sale

Description: All-plastic syringes with polypropylene barrels and polyethylene plungers. Syringe are non-sterile and packed in bulk. Two-part, all-plastic syringes with polypropylene barrels and both polyethylene and polypropylene plungers.

Catalog Number: 66064-762

Supplier: Thermo Scientific

Sale

Description: Clear, borosilicate glass. Fits varoius autosamplers. Polypropylene SepCap closures designed for easy syringe needle penetration and easy push-in pull-out from vial. Molded sealing ring secures sample containment. Capacity: 4ml. ODxLength: 15x45mm.

Catalog Number: 66011-206

Supplier: Thermo Scientific

Sale

Description: 8-425 thread finish. For narrow opening screw thread vials. High-quality, pure white silicone laminated to 0.005" red PTFE. Use when excellent resealing qualities are a must.

Catalog Number: 66030-420

Supplier: Thermo Scientific

Sale

Description: Pore size: 0.45um. Diameter: 17mm. For use with non-aqueous based and aggressive samples. Resistant to all solvents, acids, and bases. Very low in extractables and low non-specific binding. Can be used for volumes less than 10mL

Catalog Number: 66030-863

Supplier: Thermo Scientific

Sale

Description: Chemical resistant PTFE is 0.010" thick and easily penetrated by syringe needles. For one time use only and are not resealable.

Catalog Number: 66030-580

Supplier: Thermo Scientific

Sale

Description: All-plastic syringes with polypropylene barrels and polyethylene plungers. Syringe are non-sterile and packed in bulk. Two-part, all-plastic syringes with polypropylene barrels and both polyethylene and polypropylene plungers.

Catalog Number: 66064-756

Supplier: Thermo Scientific

Certificates Sale

Description: All-plastic syringes with polypropylene barrels and polyethylene plungers. Syringe are non-sterile and packed in bulk. Two-part, all-plastic syringes with polypropylene barrels and both polyethylene and polypropylene plungers.

Catalog Number: 66064-752

Supplier: Thermo Scientific

Sale

Description: Open-top. Offers excellent chemical durability. Preassembled with red PTFE-faced silicone liner. Liner is resealable for at least 20 punctures. GPI thread: 13-425.

Catalog Number: 66065-242

Supplier: Thermo Scientific

Sale

Description: All-plastic syringes with polypropylene barrels and polyethylene plungers. Syringe are non-sterile and packed in bulk. Two-part, all-plastic syringes with polypropylene barrels and both polyethylene and polypropylene plungers.

Catalog Number: 66064-758

Supplier: Thermo Scientific

Sale

Catalog Number: 66065-240

Supplier: Thermo Scientific

Sale