You Searched For: ProImmune Ltd


3,917  results were found

Sort Results

List View Easy View (new)
SearchResultCount:"3917"
Description: With left & right side 3Inch x 6Inch oval cupsink cutouts (cupsinks sold separately), for 4Feet Protector Premier Hood with Eco-Foil air foil, 48Inch w x 30Inch d x 1.25Inch thick.
Catalog Number: 89232-804
Supplier: Labconco

Product available on GSA Advantage®


Description: Borosilicate glass. Lyph-lock flask, complete, 19/38 [standard joint], 250 ml. includes glass top and bottom and silicone rubber ring seal. Freeze dry glassware.
Catalog Number: 26674-178
Supplier: Labconco

Product available on GSA Advantage®


Description: fluoropolymer resin coated. For use in RapidVap* Vacuum Evaporation Systems (26676-000, -002), (26671-482, -480), (37001-376, -378, -380, -382). Holds 110 each 13mm O.D. tubes.
Catalog Number: 13500-068
Supplier: Labconco

Product available on GSA Advantage®


Description: Protector ClassMate Laboratory Hood, Style: Benchtop, Weight: 435.0 lbs, Dimensions: 121.9 x 81.9 x 149.9 cm, Electrical: 100-115V, 50/60 Hz, 10A, Lighting: LED, Service Fixtures: 2, Style: Benchtop, Glacier white powder-coated steel frame
Catalog Number: 76045-620
Supplier: Labconco

UL Listed Environmentally Preferable CSA Certified Product available on GSA Advantage®


Description: FreeZone* Benchtop Freeze Dryer, Collector Temperature: -84 deg C, Ice Holding Capacity: 2.5L, Dimensions: 14.5wx24.5dx16.9h in, Features: lyophilizing light sample loads, On/standby switch, 3-wire electrical cord with plug, Side-mounted, Volt: 230V NA
Catalog Number: 75999-804
Supplier: Labconco

Environmentally Preferable Irregular Voltage


Description: SpillStopper* Work Surface, 4ft w x 30in d, with cupsink cutouts, left side and right rear, molded of corrosion-resistant solid epoxy. Dished & contoured to conform to interior liner of Protector Pass-Through Hoods. Pre-drilled 2.5in (6.4cm) dia plumbing holes.
Catalog Number: 10805-122
Supplier: Labconco

Environmentally Preferable Product available on GSA Advantage®


Description: FreeZone* Console Freeze Dryer, Collector Temperature: -84 deg C, Ice Holding Capacity: 12L, Dimensions: 31.8wx29.6dx36.6h in, Features: Corrosion-Resistant Collector, 3-wire electrical cord with plug, 3/4in OD vacuum, 5in touch Screen display, Volt: 230V NA
Catalog Number: 76000-082
Supplier: Labconco

Environmentally Preferable Irregular Voltage


Description: Protector ClassMate Laboratory Hood, Style: Benchtop, Weight: 400.0 lbs, Dimensions: 121.9 x 81.9 x 149.9 cm, Electrical: 100-115V, 50/60 Hz, 10A, Electrical Duplexes: 1, Lighting: LED, Service Fixtures: 2, Glacier white powder-coated steel frame
Catalog Number: 76045-916
Supplier: Labconco

UL Listed Environmentally Preferable CSA Certified Product available on GSA Advantage®


Description: Eight place. Stainless steel. For holding 600mL tubes for use in RapidVap* Vacuum and N2 Evaporation Systems (26676-000, -002, -004, 006), (26671-482, -480), (37001-376, -378, -380, -382, -384, -386).
Catalog Number: 13500-062
Supplier: Labconco

Product available on GSA Advantage®


Description: Laboratory Hood 8ft Protector PVC Perchloric Acid. 37.7in deep. Features heat-welded unplasticized PVC liner, built-in washdown system, integral work surface, drainage trough and 3/16in thick tempered safety glass vertical-rising sash with frame of powder-coated aluminum and PVC. 115V.
Catalog Number: 10118-512
Supplier: Labconco


Description: Filtered Fume Hood, Power supply: 115V, with Neutrodine filtration is appropriate for procedures that require personnel protection in a lab that cannot accomodate duct work nor make-up air, Formaldehyde sensor, Includes 2 fixtures, vertical-rising sashes, Size: 8ft
Catalog Number: 76418-548
Supplier: Labconco

Environmentally Preferable


Description: No cutouts, for 8Feet Protector Premier Hood with Eco-Foil air foil, 96Inch w x 30Inch l x 1.25Inch thick.
Catalog Number: 89232-834
Supplier: Labconco

Product available on GSA Advantage®


Description: With right rear 3Inch x 6Inch oval cupsink cutout (cupsink sold separately), for 5Feet Protector Premier Hood with Eco-Foil air foil, 60Inch w x 30Inch d x 1.25Inch thick.
Catalog Number: 89232-810
Supplier: Labconco

Product available on GSA Advantage®


Description: For Classmate* hoods. Continuously checks face velocity. Alerts user to velocities below preset level. Has face plate with circuit board, electrical power pack, probe, vinyl tubing and wiring connections. 115V, 50/60Hz.
Catalog Number: 46620-470
Supplier: Labconco

Product available on GSA Advantage®


Description: Protector ClassMate Laboratory Hood, Style: Benchtop, Weight: 610.0 lbs, Dimensions: 182.9 x 81.9 x 149.9 cm, Electrical: 100-115V, 50/60 Hz, 10A, Lighting: LED, Service Fixtures: 2, Style: Benchtop, Glacier white powder-coated steel frame
Catalog Number: 76045-654
Supplier: Labconco

UL Listed Environmentally Preferable CSA Certified Product available on GSA Advantage®


Description: FreeZone* Console Freeze Dryer, Collector Temperature: -84 deg C, Ice Holding Capacity: 12L, Dimensions: 31.8wx29.6dx36.6h in, Features: Corrosion-Resistant Collector, Purge Valve, 3-wire electrical cord, 3/4in OD vacuum, 5in touch Screen, Volt: 230V India
Catalog Number: 76000-116
Supplier: Labconco

Environmentally Preferable Irregular Voltage


33 - 48 of 3,917