You Searched For: Pump+Drives


950  results were found

Sort Results

List View Easy View (new)
SearchResultCount:"950"
Catalog Number: 76533-100
Supplier: SPEX


Description: Vial Adapter/holder Mid-Sized, with stainless steel end plugs, it open at the back end to allow the force of the impact to strike against the back anvil of the Freezer/Mill coil, For use with High capacity Freezer/Mill* and Dual C
Catalog Number: 76182-032
Supplier: SPEX


Description: Portable Cryogenic Dewar, Sturdy, aluminum 5-wheel roller base for safe and easy portability from room to room, Includes liquid withdraw device for dispensing liquid nitrogen directly into the Freezer/Mill* and Large Freezer
Catalog Number: 76182-044
Supplier: SPEX


Description: Evacuable Pellet Die Set, Ideal for pressing KBr disks for IR analysis, Set includes evacuable die body, base, plunger, two 40 mm polished steel pellets, O-ring vacuum seals and knock-out ring for sample disk extraction, Loa
Catalog Number: 76181-894
Supplier: SPEX


Description: Evacuable Pellet Die Set, Ideal for pressing sample disks for XRF analysis, Load limit: 50 tons (45.4 metric tons), includes evacuable die body, base, plunger, two 35 mm polished steel pellets, O-ring vacuum seals and knock
Catalog Number: 76181-906
Supplier: SPEX


Description: Extractor/Vial Opener for Small Vial, easier to open cold grinding vials immediately after they have been removed from the Freezer/Mill, Compatible with small grinding vials: Small Grinding Vial Set, Small Poly-Vial S
Catalog Number: 76182-226
Supplier: SPEX


Description: Cryogenic Transfer Hose, Long, flexible stainless steel hose suitable for transferring cryogenic fluids such as liquid nitrogen. Fitted with a 3/8 inch (9.5 mm) NPT male fitting on one end and a female fitting on
Catalog Number: 76182-048
Supplier: SPEX


Description: Edge-Flaring Tool, for flaring the edge of Spec-Caps* to create a tighter fit in the pellet die, prevents sample loss and pellet jamming, Increases the rim diameter to 35 mm, Compatible with 3615 33 mm Spec-Caps*, Size: 31mm
Catalog Number: 76182-402
Supplier: SPEX


Description: Pellet Tungsten Carbide, Replacement or spare 40 mm polished, for Evacuable Pellet Die Set, Ideal for routine pressing of abrasive materials, Harder than steel pellets, Polished face of pellet ensures a flat analytical surfac
Catalog Number: 76181-896
Supplier: SPEX


Description: Sleeve-and-Plunger Set, Ideal for smaller amounts (<1 g) of analyte, Used with 35mm Evacuable Pellet Die Set and any PrepAid* sample binder, Allows easy preparation of XRF disks with binder matrix
Catalog Number: 76181-912
Supplier: SPEX


Description: Pellet steel, polished for use with Evacuable Pellet Die Set, Polished face of pellet ensures a flat analytical surface on thesample disk, Made with a close tolerance and sharp edges so that sample powderwill not feather into the gap be
Catalog Number: 76181-898
Supplier: SPEX


Description: Pellet steel, polished for use with Evacuable Pellet Die Set, Polished face of pellet ensures a flat analytical surface on thesample disk, Made with a close tolerance and sharp edges so that sample powderwill not feather into the gap be
Catalog Number: 76181-910
Supplier: SPEX


Description: Evacuable Pellet Die Set, Ideal for pressing KBr disks for IR analysis, includes evacuable die body, base, plunger, two 13 mm polished steel pellets, O-ring vacuum seals, and knock-out ring for sample disk extraction, Load
Catalog Number: 76181-890
Supplier: SPEX


Catalog Number: 76531-312
Supplier: SPEX

Irregular Voltage


Catalog Number: 76182-234
Supplier: SPEX


Description: Large Extractor/Vial Opener, for use with mid-size grinding vials/Adapter, Quick and easy installation, Compatible with 6881, 6883 and 6885 Mid-Size Grinding Vial Set
Catalog Number: 76182-450
Supplier: SPEX


193 - 208 of 950