You Searched For: ITW-CHEMTRONICS,INC


214  results were found

Sort Results

List View Easy View (new)
SearchResultCount:"214"
Description: Multi-directional, high-pressure compressed gas duster. Cleans laboratory instruments, medical devices, electronics without scratching delicate surfaces. Contains 100% HFC-134a filtered to 0.2u. Safe on plastics. Ozone-safe. Nonflammable, CFC/HCFC-free, residue-free. 227g.
Catalog Number: 15145-526
Supplier: ITW Chemtronics

SDS


Description: Removes rosin and encrusted no-clean flux types from electronic assemblies, printed circuit boards, and more. Can be used in ultrasonics and spray-dispensing systems. Quick-drying. Nonflammable, no residues, and ozone-safe. CFC/HCFC-free. 340g aerosol spray.
Catalog Number: 22221-830
Supplier: ITW Chemtronics

SDS


Description: Static Free* Static-dissipative cleaner and reconditioner for ESD mats, benchtops, and surfaces. Nonflammable, nonabrasive cleaner. Noncorrosive and chloride- and amine-free. Safe to use on any surface not affected by water, Trigger spray bottle, 473mL.
Catalog Number: 15145-435
Supplier: ITW Chemtronics


Description: Removes up to four times more solder than the conventional wick, and extracts the solder much faster than wicks based on Type R fluxes. Residue is halide-free and nonconductive. On static-dissipative spools. Color: blue. Width: 2.5mm. Length: 1.5m.
Catalog Number: 14220-224
Supplier: ITW Chemtronics


Description: Ideal for any soldering process, especially water-soluble applications. Packaged on static-dissipative spools. Meets MIL-F-1425600 Type R, NASA Spec. NHB 5300.4, NPC200-4 and SP-5002. Color: green. Width: 1.4mm. Length: 1.5m.
Catalog Number: 14220-244
Supplier: ITW Chemtronics


Description: Removes up to four times more solder than the conventional wick, and extracts the solder much faster than wicks based on Type R fluxes. Residue is halide-free and nonconductive. On static-dissipative spools. Color: yellow. Width: 1.4mm. Length: 3.0m.
Catalog Number: 13502-088
Supplier: ITW Chemtronics


Description: Capacity: 60 ml (2 oz.)
Catalog Number: 15551-500
Supplier: ITW Chemtronics


Description: Size: 0.8mm. Made to fit Weller WS 80, WSD 80, WSD 130, and WSD 150 soldering stations and WSP 80 and MPR 80 soldering pencils. Corresponds to Weller part number LTH.
Catalog Number: 15552-088
Supplier: ITW Chemtronics


Description: Size: 1.3mm. Made to fit Weller WS 80, WSD 80, WSD 130, and WSD 150 soldering stations and WSP 80 and MPR 80 soldering pencils. Corresponds to Weller part number LTK.
Catalog Number: 15552-092
Supplier: ITW Chemtronics


Description: Fast-drying pen completely removes rosin fluxes from printed circuit boards in seconds. Ideal for spot cleaning tight tolerance areas. Marker dispenser provides controlled, exact application. Size: 8g.
Catalog Number: 33500-474
Supplier: ITW Chemtronics

SDS


Description: Removes dirt, dust, and dry contaminants. For use on keyboards, circuit boards, surface mount devices, computers and other electronic components. Nonflammable. Ozone-safe, CFC- and HCFC-free, and nonabrasive. 283.5g aerosol can.
Catalog Number: 15145-422
Supplier: ITW Chemtronics

SDS


Description: 283.5g refill aerosol can for the Ultrajet* Duster System (15145-422).
Catalog Number: 15145-500
Supplier: ITW Chemtronics

SDS


Description: Insulates against high-voltage arcing and corona shorts. Provides protective barrier against humidity, salt, corrosive vapors, and fungus for printed circuit boards. Meets MIL-I-46058C, Type AR. Usable temperature range: -59 to 132[degree]C. 326g aerosol can. UL.
Catalog Number: 47732-652
Supplier: ITW Chemtronics

SDS UL Listed


Description: Size: 0.3mm. Made to fit Weller WS 80, WSD 80, WSD 130, and WSD 150 soldering stations and WSP 80 and MPR 80 soldering pencils. Corresponds to Weller part number LT1.
Catalog Number: 15552-104
Supplier: ITW Chemtronics


Description: Size: 0.4mm. Fits Hakko 702, 703, 703B, 926, 927, 928, 933, 936, and 937 Soldering Stations with Handpiece M926, 900M, or 907 ESD. Also fits O.K.* Industries SA1000 Station with SAI-640 Handpiece. Corresponds to Hakko no. 900M-T-LB.
Catalog Number: 15552-018
Supplier: ITW Chemtronics


Description: Size: 2.0mm. Fits Hakko 702, 703, 703B, 926, 927, 928, 933, 936, and 937 Soldering Stations with Handpiece M926, 900M, or 907 ESD. Also fits O.K.* Industries SA1000 Station with SAI-640 Handpiece. Corresponds to Hakko no. 900M-T-2C.
Catalog Number: 15552-026
Supplier: ITW Chemtronics


81 - 96 of 214