You Searched For: EDWARDS VACUUM


84  results were found

Sort Results

List View Easy View (new)
SearchResultCount:"84"
Description: ISO size NW40 aluminum elbow, 90[degree].
Catalog Number: EVC105-16-410
Supplier: Edwards


Description: Direct drive vacuum pump provides high vapor throughput and low vacuum for multiple laboratory applications. Quiet operation. Pumping speed: 75L/minute. Ultimate vacuum: 1mtorr. NW25 inlet/outlet connections. 0.7L oil capacity. 115/230V, 50/60Hz, 300W motor. 43Lx16Wx23H.
Catalog Number: EVR140-00-001
Supplier: Edwards

Irregular Voltage


Catalog Number: EVR340-00-003
Supplier: Edwards

Irregular Voltage


Description: Direct drive vacuum pump provides high vapor throughput and low vacuum for multiple laboratory applications. Quiet operation. Pumping speed: 117L/minute. Ultimate vacuum: 1mtorr. NW25 inlet/outlet connections. 0.7L oil capacity. 115/230V, 50/60Hz, 300W motor. 43Lx16Wx23H.
Catalog Number: EVR240-00-001
Supplier: Edwards

Irregular Voltage


Description: ISO size NW10 aluminum elbow, 90[degree].
Catalog Number: EVC105-11-410
Supplier: Edwards


Catalog Number: EVC105-14-397
Supplier: Edwards


Description: Cable is required to connect active gauge display or active gauge controller to any active gauge head. Length: 1.0m.
Catalog Number: EVD400-01-010
Supplier: Edwards


Description: Cable is required to connect active gauge display or active gauge controller to any active gauge head. Length: 10.0m.
Catalog Number: EVD400-01-100
Supplier: Edwards


Description: For ISO size: NW10/16. Preformed stainless steel vacuum clamp with a bolt and molded plastic thumbscrew. Clamp springs easily into position over the flange to hold vacuum joint together prior to clamping, allowing adjustment during assembly.
Catalog Number: EVC105-12-401
Supplier: Edwards


Description: For ISO size: NW16. Nitrile replacement O-ring. Length: 1.8cm.
Catalog Number: EVH021-24-013
Supplier: Edwards


Description: Clamping Rings
Catalog Number: EVC105-14-401
Supplier: Edwards


Description: For ISO size: NW10. Stainless steel centering ring supplied with nitrile O-ring. Length: 1.3cm.
Catalog Number: EVC105-11-396
Supplier: Edwards


Description: For ISO size: NW25. Viton* replacement O-ring. Length: 1.8cm.
Catalog Number: EVH021-24-035
Supplier: Edwards


Description: Cable is required to connect active gauge display or active gauge controller to any active gauge head. Length: 5.0m.
Catalog Number: EVD400-01-050
Supplier: Edwards


Description: For ISO size: NW10. Viton* replacement O-ring. Length: 1.5cm.
Catalog Number: EVH021-24-032
Supplier: Edwards


Description: For ISO size: NW40. Preformed stainless steel vacuum clamp with a bolt and molded plastic thumbscrew. Clamp springs easily into position over the flange to hold joint together prior to clamping, allowing adjustment during assembly.
Catalog Number: EVC105-16-401
Supplier: Edwards


33 - 48 of 84