You Searched For: Masterflex Single-use


135  results were found

Sort Results

List View Easy View (new)
SearchResultCount:"135"
Description: SupraSolv® ECD and FID is specially developed for gas chromatography in combination with ECD (Electron Capture Detetor) and FID (Flame Ionization detector). SupraSolv® solvents offer the largest specified retention time range, a clear baseline and a minimal signal-to-noise ratio leading to reliable and reproducible analysis results.
Catalog Number: EM1.06011.4000
Supplier: MilliporeSigma

Description: SupraSolv® MS is dedicated for use in gas chromatography coupled with mass spectrometric detection. SupraSolv® solvents offer the largest specified retention time range, a clear baseline and a minimal signal-to-noise ratio leading to reliable and reproducible analysis results.
Catalog Number: EM1.00837.2500
Supplier: MilliporeSigma

Description: Methanol, Cas number: 67-56-1, Hill Formula: CH4O, Molar Mass: 32.04 g/mol, Boiling point: 64.5 degree C (1013 hPa), Density: 0.792 g/cm3 (20 degree C), Flash point: 9.7 degree C Ignition temperature: 420 degree C, Melting Point: -98 degree C, Size: 2l
Catalog Number: EM1.03726.2002
Supplier: MilliporeSigma


Description: Meets ACS Specifications, Meets Reagent Specifications for testing USP/NF monographs
Catalog Number: EM-MX0487-20
Supplier: MilliporeSigma

Description: For use in the preparation of volatile organic standards.
Catalog Number: EM-MX0482-6
Supplier: MilliporeSigma

Description: These reagents are produced using specially selected distillation methods that ensure consistently high dryness and batch-to-batch consistency. To protect the quality of these products even better from potential contaminants, a septum seal cap provides multiple layers of protection to keep solvents in flawless condition before, during, and after removal.
Catalog Number: EM1.06012.2500
Supplier: MilliporeSigma

Description: Tested for use in gas chromatography and residue analysis.
Catalog Number: EM-MX0484-1
Supplier: MilliporeSigma

Description: Suitable for use in spectrophometry and HPLC and gas chromatography. Gradient controlled for absence of lipophilic interferences at 254 and 235nm. UV cutoff 203nm. Certificate of Analysis on label.
Catalog Number: EM-MX0488-1
Supplier: MilliporeSigma

Description: Meets ACS Specifications, Meets Reagent Specifications for testing USP/NF monographs.
Catalog Number: EM-MX0485-8
Supplier: MilliporeSigma

Description: Used as a fixative for hematology and a substitute for ethanol.
Catalog Number: EM-MX0490-3
Supplier: MilliporeSigma

Description: Grade ACS , Cas Number 67-56-1
Catalog Number: EM1.07018.2511
Supplier: MilliporeSigma

SDS


Description: Clear and free from particulates. Suitable for use in organic synthesis and other anhydrous solvent applications. Elbow adapter with septum cap (EM-692004-2) allows for the removal of solvent under nitrogen atmosphere. Replacement septum (EM-692004S-2), for use with elbow adapter, minimizes air and moisture intrusion once the primary septum is punctured. Drying tube (EM-692010-2) filled with t.h.e.* desiccant indicating silica gel removes solvent under a dry-air atmosphere. Large plug (EM-692012-2) is a replacement plug for bottle top.
Catalog Number: EM-MX0472-7
Supplier: MilliporeSigma

Description: Methanol gradient grade, suitable for UPLC and UHPLC.
Catalog Number: EM1.06007.4000
Supplier: MilliporeSigma

Description: Offering a high degree of UV transmittance, low particle count, low acidity and alkalinity, and low evaporation residue level, LiChrosolv® solvents are ideal for reproducible separations. They are produced from specially selected raw materials, and undergo a number of purification steps prior to final packaging. Since separations are normally carried out under gradient conditions in analytical HPLC, Merck Millipore offer solvents in ’gradient grade’ as well as ’isocratic grade’. This enables you to minimise the gradient effect of the solvent involved.
Catalog Number: EM1.06018.1000
Supplier: MilliporeSigma

Description: LiChrosolv® hypergrade is accurately tested for LC-MS suitability, and meet all the requirements of modern LC-MS ionization methods (ESI/APCI - positive and negative mode).
Catalog Number: EM1.06035.1000
Supplier: MilliporeSigma

Description: Emplura* Methanol, Cas number: 67-56-1, Chemical Formula:CH3OH, Solvent for lab application, 180l.
Catalog Number: EM8.22283.2500
Supplier: MilliporeSigma

SDS


1 - 16 of 135