Print…

You Searched For: Masterflex+Luer+Fittings


10,379  results were found

Refine Results Sort by

Sort Results

List View Easy View (new)
SearchResultCount:"10379"

Rate These Search Results

Product Image-76407-118

The VWR* Refrigerated High Capacity Shaking Incubator has a temperature range of -15 degree C to 60 deg C, capable of 10l, A standard rubber mat is included and the optional Magnetic Clamp System is available for quick and tool-less exchange of platforms, 230V

Description: The VWR* Refrigerated High Capacity Shaking Incubator has a temperature range of -15 degree C to 60 deg C, capable of 10l, A standard rubber mat is included and the optional Magnetic Clamp System is available for quick and tool-less exchange of platforms, 230V
Catalog Number: 76407-118
Supplier: VWR International

Irregular Voltage


Product Image-KT781050-2440

Stirrers Bearing PTFE / Glass

Description: [standard taper] Joint; 24/40. Shaft, (mm); 10. Approx. OAL, (mm); 150 Threaded glass ground joint bearings seal against the stirrer shaft by means of a TFE o-ring, a precision bore PTFE sleeve bearing and a PTFE tightening screw with lock nut and washer.
Catalog Number: KT781050-2440
Supplier: DWK Life Sciences (KIMBLE)
Product Image-33994-116

R1382 Three-Bladed Propeller Stirrer

Description: Stainless steel. 5.6diameterx35.2Lcm. Maximum speed range: 2000rpm.
Catalog Number: 33994-116
Supplier: IKA Works
Product Image-59062-188

Chemware Stirring Rod, PTFE Fluoropolymer

Description: Length/Height (w/Closure): 204.8 mm (8.1 in.). Diameter (Ring Measure): 7.6 mm (0.3 in.). Contains fully enclosed steel insert for stiffness, yet can be bent to various shapes for use as a powered stirrer.
Catalog Number: 59062-188
Supplier: Saint Gobain Performance Plastics
Product Image-59062-246

Chemware Stirring Rod, PTFE Fluoropolymer

Description: Length/Height (w/Closure): 306.4 mm (12.1 in.). Diameter (Ring Measure): 7.6 mm (0.3 in.). Contains fully enclosed steel insert for stiffness, yet can be bent to various shapes for use as a powered stirrer.
Catalog Number: 59062-246
Supplier: Saint Gobain Performance Plastics
Product Image-59062-213

Chemware Stirring Rod, PTFE Fluoropolymer

Description: Length/Height (w/Closure): 255.6 mm (10.1 in.). Diameter (Ring Measure): 7.6 mm (0.3 in.). Contains fully enclosed steel insert for stiffness, yet can be bent to various shapes for use as a powered stirrer.
Catalog Number: 59062-213
Supplier: Saint Gobain Performance Plastics
Product Image-59062-304

Chemware Stirring Rod, PTFE Fluoropolymer

Description: Length/Height (w/Closure): 410.6 mm (16.2 in.). Diameter (Ring Measure): 7.6 mm (0.3 in.). Contains fully enclosed steel insert for stiffness, yet can be bent to various shapes for use as a powered stirrer.
Catalog Number: 59062-304
Supplier: Saint Gobain Performance Plastics

Certificates


Product Image-52428-764

VWR*Stand Base Only

Description: Cast Zinc-Aluminum Alloy Coated With Chemical Resistant Epoxy. Two Level Adjustment Knobs.To Use With Caframo Overhead Stirrers Bdc1850 - 58960-447, Bdc3030 - 77776-348, Bdc6015 - 77776-354. Measures 17.5Inch Deep, 17Inch Outter Width, And 12 3/4Inch Inner Width.
Catalog Number: 52428-764
Supplier: Caframo
Product Image-89176-704

3-Bladed Propeller Stirrer

Description: Flow-Efficient design. for drawing the material to be mixed from the top and the bottom. minimum shearing forces. used at medium to high speeds
Catalog Number: 89176-704
Supplier: IKA Works
Product Image-470105-486

KIT JUNIOR MAGNETS GRADES 3-6 TD/CT

Catalog Number: 470105-486
Supplier: VWR
Product Image-470006-858

KIT JUNIOR MAGNETS PREK-2 TD/CT

Catalog Number: 470006-858
Supplier: VWR
Product Image-470016-702

CORD SET 12 BANANA ST/16 WLS31120-8LM

Catalog Number: 470016-702
Supplier: VWR
Product Image-470016-700

CORD SET 24 BANANA ST/10 WLS31120-5NP

Catalog Number: 470016-700
Supplier: VWR
Product Image-33998-302

Three-Bladed Propeller Stirrer

Description: Made of stainless steel. Flow-efficient design. For drawing the material to be mixed from the top and the bottom. Minimum shearing forces. Used at medium to high speeds.
Catalog Number: 33998-302
Supplier: IKA Works
Product Image-KT781030-0124

Stirrer Assembly

Description: Complete with glass shaft and bearing. Blade is PTFE. Assembly designed for use with flask holding a volume of 500-5000ml and having a Standard Taper 24/40 joint. Approximate overall dimensions are 445Lx75Wmm with a 10mm shaft OD.
Catalog Number: KT781030-0124
Supplier: DWK Life Sciences (KIMBLE)
Product Image-76407-116

VWR* Refrigerated Shaking Incubator, High Capacity, has a temperature range of -15 degree C to 60 degree C, standard rubber mat is included and the optional Magnetic Clamp System is available for quick and tool-less exchange of platforms and clamps

Description: VWR* Refrigerated Shaking Incubator, High Capacity, has a temperature range of -15 degree C to 60 degree C, standard rubber mat is included and the optional Magnetic Clamp System is available for quick and tool-less exchange of platforms and clamps
Catalog Number: 76407-116
Supplier: VWR International
5,185 - 5,200 of 10,379