You Searched For: (2-Bromo-3-butoxy-6-chlorophenyl)boronic acid

Catalog Number: 100501-222

Supplier: Electron Microscopy Sciences

Sale

Description: Made from acetyl polymer This new version of Micromesh™ offers 1676 square openings (0.38 mm) allowing for a greatly improved fluid exchange without having to use the biopsy pads

Catalog Number: 101413-194

Supplier: Electron Microscopy Sciences

Sale

Description: A set of two small bottles, each containing 60 cc. of TorrLube® lubricant

Catalog Number: 101454-054

Supplier: Electron Microscopy Sciences

Sale

Description: Polypropylene rack has 96 wells to accommodate 0.5 mL micro centrifuge tubes on one side, or 96 wells for 1.5 to 2.0 mL micro centrifuge tubes on the other side. Arranged in standard 8 x 12 array. Handy lid snaps into place in the tabs on each end of rack. Grid lines are molded on the side of the rack that accommodates the smaller tubes making it easier to see the wells. Raised rings are molded on the opposite side of the rack making it easier to replace the 1.5 to 2.0 mL tubes from those wells. Rack measures 9.75 x 4.75 x 1.875".

Catalog Number: 102093-656

Supplier: Electron Microscopy Sciences

Sale

Description: Unflexible grids, made of a special beryllium-copper alloy, nickel and molybdenum.

Catalog Number: 103301-816

Supplier: Electron Microscopy Sciences

Sale

Description: Multi purpose glass sample vials suited for research studies. Clear vials are manufactured from Wheaton-33R a low extractable borosilicate glass which protects against changes in the pH and maintains sample integrity. Amber vials are manufactured from Wheaton '320' borosilicate glass and protects light-sensitive samples.

Catalog Number: 100500-276

Supplier: Electron Microscopy Sciences

Sale

Description: Available in two specially shaped capsules which are designed to overcome commonly encountered embedding problems; such as, small or thin elongated specimens and powder samples. These capsules are also good for centrifuging precipitated matters and allows for less trimming. The bottle neck capsule produces a 7.9 mm OD block with a hemihyperpoloid (rather than faced) tip. The conical capsule produces a 7.9 mm OD block with a conical (rather than faced) tip.
*BEEM® Is A Registered Trademark of Better Equipment For Electron Microscopy, Inc.

Catalog Number: 100501-202

Supplier: Electron Microscopy Sciences

Sale

Description: The innoculating loops are made from durable, heat resistant brass with a fiber glass insulating sleeve over the gripping area. The threaded collet type collar holds all wire gauge.

Catalog Number: 100498-114

Supplier: Electron Microscopy Sciences

Sale

Description: Custom tip designed from tungsten. Tip radius is < 0.5 µm with 6° taper angle for maximum lifetime service. Compatible with Short-Cut™ system for direct conversion to TEM grid

Catalog Number: 102681-284

Supplier: Electron Microscopy Sciences

Sale

Description: TEM grid holder with stations for two TEM grids and two sample stubs. Available with two versions: very slightly magnetic stainless steel and non-magnetic aluminum. Long post – standard is 3.2 mm (¹/₈") diameter and 8.1 mm (0.32") length.

Catalog Number: 102681-310

Supplier: Electron Microscopy Sciences

Sale

Description: This container will permit rapid specimen handling and provides temperature information during microwave irradiation. A liquid crystal strip is affixed into the bottom of a 35 mm diameter petri dish and covered with a thin layer of EMbed resin. The temperature range is 35°C-60°C. This container is ideal for tissue fixing by microwaves. The two active temperature windows are 45°C and 50°C.

Catalog Number: 100501-952

Supplier: Electron Microscopy Sciences

Sale

Description: MicroRT™ is the answer for high-throughput room temperature diffraction screening and data collection. Ideal for both room-temperature structure determination and for diagnosing the cause of poor low-temperature diffraction. Made of poly ethylene terephthalate.

Catalog Number: 102092-990

Supplier: Electron Microscopy Sciences

Sale

Description: Staining Jar holds 5 single 1x3" slides vertically, or 10 slides back-to-back

Catalog Number: 100500-230

Supplier: Electron Microscopy Sciences

Sale

Description: A prepared Microscope Slide Cataloging and Storage System. The slide files contain 48 partitioned compartments which will hold an estimated 10 of 1x3" glass slides per cell (480 slides per case) or 10 of 3x2" slides per cell (240 slides per case) by removing two alternate long partitions. A 3/8" (100mm) cushioning space surrounding the partitioned compartment serves as a protective barrier against damage to the stored slides. For other storage needs, all or alternate partitions are removed for conversion to larger size compartments.

Catalog Number: 100490-288

Supplier: Electron Microscopy Sciences

Sale

Description: Type Hexagonal and Square represent our efforts to reduce the grid bar width (only 5 microns) enabling more of the specimen to be viewed

Catalog Number: 100501-572

Supplier: Electron Microscopy Sciences

Sale

Description: The Via-Cell® bioaerosol sampling cassette is designed to collect both viable and non-viable bioaerosols, maintain visibility of the viable mold spores and prevent growth during transport to the laboratory. It is the first disposable cassette impactor with multiple analysis options that brings simplicity and reliability to viable bioaerosol sampling.

Catalog Number: 102681-070

Supplier: Electron Microscopy Sciences

Sale