You Searched For: Microarray Slides

Manual or powered laboratory presses are suited to meet the many specimen preparation requirements or compressing procedures. Some powered styles come fully automated for the best working efficiency. Common applications include drying and flattening samples for botanical collecting, preparing powdered materials into tablet forms for use in calorimeter tests, pellet pressing, compression strength tests, and fluid extractions. The presses are ideal for research, compacting, molding rubber or plastic, laminating, and ceramics applications.

Manual or powered laboratory presses are suited to meet the many specimen preparation requirements or compressing procedures. Some powered styles come fully automated for the best working efficiency. Common applications include drying and flattening samples for botanical collecting, preparing powdered materials into tablet forms for use in calorimeter tests, pellet pressing, compression strength tests, and fluid extractions. The presses are ideal for research, compacting, molding rubber or plastic, laminating, and ceramics applications.


2,318  results were found

Sort Results

List View Easy View (new)
SearchResultCount:"2318"
Description: Manual, W×D×H: 30.5×35.6×63.5 cm (12×14×25")
Catalog Number: 29999-808
Supplier: Carver


Description: Plant Press Blotter Dryer Sheet - 6 x 9" 100 pack
Catalog Number: 470332-442
Supplier: Ward's Science


Catalog Number: 76579-272
Supplier: Mortech Manufacturing


Description: Pellet Tungsten Carbide, Replacement or spare 40 mm polished, for Evacuable Pellet Die Set, Ideal for routine pressing of abrasive materials, Harder than steel pellets, Polished face of pellet ensures a flat analytical surfac
Catalog Number: 76181-896
Supplier: SPEX


Description: Sleeve-and-Plunger Set, Ideal for smaller amounts (<1 g) of analyte, Used with 35mm Evacuable Pellet Die Set and any PrepAid* sample binder, Allows easy preparation of XRF disks with binder matrix
Catalog Number: 76181-912
Supplier: SPEX


Description: Pellet Tungsten Carbide, Replacement or spare 35mm polished, for Evacuable Pellet Die Set, Ideal for routine pressing of abrasive materials, Harder than steel pellets, Polished face of pellet ensures a flat analytical surface
Catalog Number: 76181-908
Supplier: SPEX


Description: Pellet steel, polished for use with Evacuable Pellet Die Set, Polished face of pellet ensures a flat analytical surface on thesample disk, Made with a close tolerance and sharp edges so that sample powderwill not feather into the gap be
Catalog Number: 76181-898
Supplier: SPEX


Description: Pellet steel, polished for use with Evacuable Pellet Die Set, Polished face of pellet ensures a flat analytical surface on thesample disk, Made with a close tolerance and sharp edges so that sample powderwill not feather into the gap be
Catalog Number: 76181-892
Supplier: SPEX


Description: Pellet steel, polished for use with Evacuable Pellet Die Set, Polished face of pellet ensures a flat analytical surface on thesample disk, Made with a close tolerance and sharp edges so that sample powderwill not feather into the gap be
Catalog Number: 76181-910
Supplier: SPEX


Description: Evacuable Pellet Die Set, Ideal for pressing KBr disks for IR analysis, includes evacuable die body, base, plunger, two 13 mm polished steel pellets, O-ring vacuum seals, and knock-out ring for sample disk extraction, Load
Catalog Number: 76181-890
Supplier: SPEX


Description: X-Press* 35-Ton Automated, Voltage: 230V/50Hz, Platen Size: 3.25 inch (8 cm) diameter, Daylight: Adjustable 2.0 to 6.0 inches (5 to 15 cm), Screw Adjustment: 3.5 inches (9 cm), Dimensions 20.0 in. (50.8 cm) high x 13.0
Catalog Number: 76181-930
Supplier: SPEX


Description: Stainless steel die set for XRF sample analysis. Usable with laboratory presses. Consists of base, main cylindrical body, two optically polished stainless steel pellets, plunger, collection up and O-rings. Maximum force indicated on each die set. Produces 13mm IR sample pellets.
Catalog Number: 89079-864
Supplier: Chemplex


Description: Evacuable Pellet Die Set, standard sample disks for XRF, includes evacuable die body, base, plunger, two 31 mm polished steel pellets (3623ST), O-ring vacuum seals, and knock-out ring for sample disk extraction, Compatible
Catalog Number: 76182-386
Supplier: SPEX


Description: Sleeve-and-Plunger Set, used with 3623 31mm Evacuable Pellet Die Set and any PrepAid* sample binder, Allows easy preparation of XRF disks with binder matrix, Ideal for smaller amounts (less than 1g) of analyte, prevents damage
Catalog Number: 76182-400
Supplier: SPEX


Description: Steel Pellet, Replacement or spare, for 3623 31mm Evacuable Pellet Die Set, Ideal for routine pressing of non-abrasive materials, Polished face of pellet ensures a flat analytical surface, Made with a close tolerance and sharp edges, Si
Catalog Number: 76182-398
Supplier: SPEX


Description: Edge-Flaring Tool, for flaring the edge of Spec-Caps* to create a tighter fit in the pellet die, prevents sample loss and pellet jamming, Increases the rim diameter to 35 mm, Compatible with 3615 33 mm Spec-Caps*, Size: 31mm
Catalog Number: 76182-402
Supplier: SPEX


81 - 96 of 2,318