Print…

You Searched For: Supports

Supports are designed to hold specific-sized samples and equipment for safe reaction testing procedures. With strong construction, the devices act as protective barriers to keep the benchtop surface and handlers safe from intensely heated samples or harsh solvents. Stands will also precisely position the supplies for specific requirements and allow researchers both hands for maximum working efficiency. The supports give employed instruments the stabilization needed for a controlled and accurate analysis.

Supports are designed to hold specific-sized samples and equipment for safe reaction testing procedures. With strong construction, the devices act as protective barriers to keep the benchtop surface and handlers safe from intensely heated samples or harsh solvents. Stands will also precisely position the supplies for specific requirements and allow researchers both hands for maximum working efficiency. The supports give employed instruments the stabilization needed for a controlled and accurate analysis.


78  results were found

Refine Results Sort by
SearchResultCount:"78"

Sort Results

List View Easy View (new)

Rate These Search Results

Product Image-470017-722

Filter Support Collar

Catalog Number: (470017-722)
Supplier: United Scientific Supplies
Description: Filter Support Collar is a sturdy, molded rubber filter disc.
Product Image-76293-288

Filter Adapter Set, 7-Piece, Synthetic Rubber, United Scientific Supplies

Catalog Number: (76293-288)
Supplier: United Scientific Supplies
Description: Set of seven neoprene adapter cones designed to fit Buchnew and fritter glass funnels, porcelain filters without headpieces and for reverse flow cleaning for filter crucibles.
Product Image-470303-940

Filter Adapter Set of 7, Neoprene

Catalog Number: (470303-940)
Supplier: United Scientific Supplies
Description: High Quality for the Classroom.
Product Image-76333-364

CHEMRXNHUB™ Dual Support Stands, Benchtop Reactors, Chemglass

Catalog Number: (76333-364)
Supplier: Chemglass
Description: Supports 2 reactors side by side from 300 ml to 5 L. This unique stationary reactor stand is designed to fit into most benchtop hoods.
Product Image-33793-064

Mantle Extension Support, Series O, Glas-Col®

Supplier: Glas-Col
Description: Table-top support holds hemispherical and spherical Series O mantles up to 1L capacity

Small Business Enterprise

Product Image-80064-016

MINUM-WARE®, Neoprene Filter Adapters, Chemglass

Supplier: Chemglass
Description: Microscale neoprene filter adapters for use with MW-122 filtering flasks.

Small Business Enterprise

Product Image-76333-662

Support/Holding Rods, PT Sensors, Hot Plate, Chemglass

Catalog Number: (76333-662)
Supplier: Chemglass
Description: For fastening a temperature sensor/probe with a boss head to the vertical support rod on a hotplate.
Image Unavailable-470353-224

Bumper Guards for Volumetric Flasks

Supplier: United Scientific Supplies
Description: Protect volumetric flasks from accidentally being tipped over.

Product Image-57020-296

Holder for Nutating Shakers, Erlenmeyer Flask, Glas-Col

Supplier: Glas-Col
Description: Specially designed for our floor model and mid range shakers

Small Business Enterprise

Product Image-300052-806

Max-Jax™ Pipe Stands, Sumner

Catalog Number: (300052-806)
Supplier: Safety & Industrial Supplies
Description: Pipe Ø: 4 in [Min], 40 in [Max]
Product Image-76293-286

Rubber Filter Aid, United Scientific Supplies

Catalog Number: (76293-286)
Supplier: United Scientific Supplies
Description: This molded rubber filter disc is designed to support and seal in place a filter crucible or a funnel in the neck of a filter flask.
Product Image-100498-820

Weighted Beaker/Flask Holder, Electron Microscopy Sciences

Supplier: Electron Microscopy Sciences
Description: This weighted holder grips the beaker or flask firmly in four flared stainless steel prongs

Minority or Woman-Owned Business Enterprise

Product Image-470349-812

Silicone Flask Stand

Catalog Number: (470349-812)
Supplier: United Scientific Supplies
Description: Hold flasks of all sizes upright without tipping over.
Product Image-76293-590

Lattice Lab Rod Connector, United Scientific Supplies

Catalog Number: (76293-590)
Supplier: United Scientific Supplies
Description: This aluminum connector is used to attach two aluminum rods together.
Product Image-76333-368

CHEMRXNHUB™ Triple Support Stands, Benchtop Reactors, Chemglass

Catalog Number: (76333-368)
Supplier: Chemglass
Description: Supports (3) reactors side/side from 300 ml to 5 L. This unique stationary reactor stand is designed to fit into most benchtop hoods.
Product Image-470344-742

Eisco Round Bottom Flask Stands

Supplier: Wards
Description: Cup-shaped flask stand capable of holding up to 10 L round bottom flasks upright.

Inquire for Price
Stock for this item is limited, but may be available in a warehouse close to you. Please make sure that you are logged in to the site so that available stock can be displayed. If the call is still displayed and you need assistance, please call us at 1-800-932-5000.
Stock for this item is limited, but may be available in a warehouse close to you. Please make sure that you are logged in to the site so that available stock can be displayed. If the call is still displayed and you need assistance, please call us at 1-800-932-5000.
In order to process your orders without delay, we request that you provide the required business documentation to purchase this product.

To order chemicals, medical devices, or other restricted products please provide identification that includes your business name and shipping address via email CMD_NA@vwr.com or fax 484.881.5997 referencing your VWR account number . Acceptable forms of identification are:

  • State issued document with your organization's Federal Tax ID Number
  • State issued document with your organization's Resale Tax ID Number
  • City or County issued Business License
  • State Department of Health Services License
  • Any other ID issued by the State that includes the business name and address

* Please note if your account is within the State of California two of these pieces of identification will be required.
VWR will not lift restrictions for residential shipping addresses.

-Additional Documentation May be needed to purchase this item. A VWR representative will contact you if needed.
This product has been blocked by your organization. Please contact your purchasing department for more information.
The original product is no longer available. The replacement shown is available.
This product is no longer available. Alternatives may be available by searching with the VWR Catalog Number listed above. If you need further assistance, please call VWR Customer Service at 1-800-932-5000.
49 - 64 of 78
no targeter for Bottom