Sort Results

List View Easy View (new)
SearchResultCount:"168"
Catalog Number: 15145-569
Supplier: ITW Chemtronics


Description: High-viscosity, peelable. 236mL squeeze bottle. Thicker coating does not seep through thru-holes. Can be introduced to wave solder preheat within four minutes without adverse effects. Dries tack-free. Stable to 268[degree]C. CFC/HCFC-free. Upper ozone- and plastic-safe.
Catalog Number: 14224-626
Supplier: ITW Chemtronics


Description: Features head thermoforming and welding. acid and solvent-resistant. validates pharmaceutical/biotech surfaces. head: 3wx3.3lmm. handle: 2.3wx70lmm. 500/pack, 5 packs per case (2500per case)
Catalog Number: 15145-409
Supplier: ITW Chemtronics


Catalog Number: 76238-532
Supplier: ITW Chemtronics


Description: Open-Cell Structure Is Highly Absorbent. Fiberless Construction; Free Of Adhesives And Binders. With 15.2Cm Polypropylene Handles. 500 Per Pack, 5 Packs Per Case
Catalog Number: 15145-405
Supplier: ITW Chemtronics


Description: Aggresive bond. Highly moisture/chemical resistant. Fully cured bond has lap shear strength >400kg ,shore hardness >31kg. Volume resistivity <0.001 ohms-cm, thermal conductivity is 11.0 BTU in/ft.2 hr [degree]F). Solderless connections.
Catalog Number: 33500-072
Supplier: ITW Chemtronics


Catalog Number: 83007-604
Supplier: ITW Chemtronics


Description: Dry/wet wipe cleaning system. Dry wipes for monitor screens; wet wipes for static dissipative treatment with disposable applicator. Remove dust, dirt, oils. Control static-generated contamination. Each dry and wet wipe hermetically sealed to prevent evaporation.
Catalog Number: 47733-170
Supplier: ITW Chemtronics


Description: 3.8L. Fast curing, safe for most plastics, and dries tack-free in 30 minutes. Compatible with flux systems and stable with cleaning solvents. Stable to 268[degree]C. CFC/HCFC-free. Upper ozone- and plastic-safe.
Catalog Number: 14224-624
Supplier: ITW Chemtronics


Description: Removes up to four times more solder than the conventional wick, and extracts the solder much faster than wicks based on Type R fluxes. Residue is halide-free and nonconductive. On static-dissipative spools. Color: blue. Width: 2.5mm. Length: 1.5m.
Catalog Number: 14220-224
Supplier: ITW Chemtronics


Description: Size: 0.3mm. Made to fit Weller WS 80, WSD 80, WSD 130, and WSD 150 soldering stations and WSP 80 and MPR 80 soldering pencils. Corresponds to Weller part number LT1.
Catalog Number: 15552-104
Supplier: ITW Chemtronics


Description: Removes dirt, dust, and dry contaminants. For use on keyboards, circuit boards, surface mount devices, computers and other electronic components. Nonflammable. Ozone-safe, CFC- and HCFC-free, and nonabrasive. 283.5g aerosol can.
Catalog Number: 15145-422
Supplier: ITW Chemtronics

SDS


Description: Insulates against high-voltage arcing and corona shorts. Provides protective barrier against humidity, salt, corrosive vapors, and fungus for printed circuit boards. Meets MIL-I-46058C, Type AR. Usable temperature range: -59 to 132[degree]C. 326g aerosol can. UL.
Catalog Number: 47732-652
Supplier: ITW Chemtronics

SDS UL Listed


Description: 283.5g refill aerosol can for the Ultrajet* Duster System (15145-422).
Catalog Number: 15145-500
Supplier: ITW Chemtronics

SDS


Description: Size: 0.8mm. Made to fit Weller WS 80, WSD 80, WSD 130, and WSD 150 soldering stations and WSP 80 and MPR 80 soldering pencils. Corresponds to Weller part number LTH.
Catalog Number: 15552-088
Supplier: ITW Chemtronics


Description: Fast-drying pen completely removes rosin fluxes from printed circuit boards in seconds. Ideal for spot cleaning tight tolerance areas. Marker dispenser provides controlled, exact application. Size: 8g.
Catalog Number: 33500-474
Supplier: ITW Chemtronics

SDS


257 - 168 of 168