Print…

You Searched For: Presses

Manual or powered laboratory presses are suited to meet the many specimen preparation requirements or compressing procedures. Some powered styles come fully automated for the best working efficiency. Common applications include drying and flattening samples for botanical collecting, preparing powdered materials into tablet forms for use in calorimeter tests, pellet pressing, compression strength tests, and fluid extractions. The presses are ideal for research, compacting, molding rubber or plastic, laminating, and ceramics applications.

Manual or powered laboratory presses are suited to meet the many specimen preparation requirements or compressing procedures. Some powered styles come fully automated for the best working efficiency. Common applications include drying and flattening samples for botanical collecting, preparing powdered materials into tablet forms for use in calorimeter tests, pellet pressing, compression strength tests, and fluid extractions. The presses are ideal for research, compacting, molding rubber or plastic, laminating, and ceramics applications.


111  results were found

Refine Results Sort by

Sort Results

List View Easy View (new)
SearchResultCount:"111"

Rate These Search Results

Product Image-76181-898

Pellet steel 40mm

Description: Pellet steel, polished for use with Evacuable Pellet Die Set, Polished face of pellet ensures a flat analytical surface on thesample disk, Made with a close tolerance and sharp edges so that sample powderwill not feather into the gap be
Catalog Number: 76181-898
Supplier: SPEX
Product Image-76182-400

Sleeve-and-Plunger Set 31mm

Description: Sleeve-and-Plunger Set, used with 3623 31mm Evacuable Pellet Die Set and any PrepAid* sample binder, Allows easy preparation of XRF disks with binder matrix, Ideal for smaller amounts (less than 1g) of analyte, prevents damage
Catalog Number: 76182-400
Supplier: SPEX
Product Image-76182-398

Steel Pellet 31mm

Description: Steel Pellet, Replacement or spare, for 3623 31mm Evacuable Pellet Die Set, Ideal for routine pressing of non-abrasive materials, Polished face of pellet ensures a flat analytical surface, Made with a close tolerance and sharp edges, Si
Catalog Number: 76182-398
Supplier: SPEX
Product Image-76182-406

X-Press* 35-ton

Description: X-Press*, hydraulic laboratory pellet press that accepts 13 mm, 31 mm, 35 mm, and 40 mm pellet die sets, Automatic and fully programmable, CE Approved, Ideal for repetitive pressing of sample pellets for XRF, IR, Dimensions: 20x13x22.5inc
Catalog Number: 76182-406
Supplier: SPEX
Product Image-76182-388

Tungsten Carbide Pellet 31mm

Description: Tungsten Carbide Pellet, Replacement or spare, for 3623 31mm Evacuable Pellet Die Set, Ideal for routine pressing of abrasive materials, Harder than steel pellets, Polished face of pellet ensures a flat analytical surface, Si
Catalog Number: 76182-388
Supplier: SPEX
Product Image-29999-808

Manual, W×D×H: 30.5×35.6×63.5 cm (12×14×25")

Description: Manual, W×D×H: 30.5×35.6×63.5 cm (12×14×25")
Catalog Number: 29999-808
Supplier: Carver
Product Image-53889-009

Test Cylinder Outfit, 2.86cm ID

Description: For pressing out samples of vegetable oil from oil-bearing materials; molding, briquetting, and forming materials under pressure; and studying effects of various unit pressures. Complete with stainless steel plunger and base plug, nickel-plated cylinder, and ejector.
Catalog Number: 53889-009
Supplier: Carver
Product Image-15566-208

Tungsten Carbide Pellets

Description: For use with Evacuable Powdered Sample Briquetting Dies for briquetting very hard or abrasive powdered sample materials. 35mm briquette diameter.
Catalog Number: 15566-208
Supplier: Chemplex
Product Image-15566-214

Stainless Steel Pellets

Description: Replacement pellets for use with Evacuable Powdered Sample Briquetting Dies. 35mm briquette diameter.
Catalog Number: 15566-214
Supplier: Chemplex
Product Image-15566-206

Tungsten Carbide Pellets

Description: For use with Evacuable Powdered Sample Briquetting Dies for briquetting very hard or abrasive powdered sample materials. 32mm briquette diameter.
Catalog Number: 15566-206
Supplier: Chemplex
Product Image-76182-402

Edge-Flaring Tool 35 mm

Description: Edge-Flaring Tool, for flaring the edge of Spec-Caps* to create a tighter fit in the pellet die, prevents sample loss and pellet jamming, Increases the rim diameter to 35 mm, Compatible with 3615 33 mm Spec-Caps*, Size: 31mm
Catalog Number: 76182-402
Supplier: SPEX
Product Image-15566-216

Stainless Steel Pellets

Description: Replacement pellets for use with Evacuable Powdered Sample Briquetting Dies. 40mm briquette diameter.
Catalog Number: 15566-216
Supplier: Chemplex
Image Unavailable-29999-824

SEAL KIT

Catalog Number: 29999-824
Supplier: Carver
Product Image-76181-900

Sleeve-and-Plunger Set 40 mm

Description: Sleeve-and-Plunger Set, used with Evacuable Pellet Die Set and any PrepAid* sample binder. Instructions included, Allows easy preparation of XRF disks with binder matrix supporting a layer of sample, prevents damage, Ideal fo
Catalog Number: 76181-900
Supplier: SPEX
Product Image-15566-210

Tungsten Carbide Pellets

Description: For use with Evacuable Powdered Sample Briquetting Dies for briquetting very hard or abrasive powdered sample materials. 40mm briquette diameter.
Catalog Number: 15566-210
Supplier: Chemplex
Product Image-470332-442

Plant Press Blotter Dryer Sheet - 6 x 9" 100 pack

Description: Plant Press Blotter Dryer Sheet - 6 x 9" 100 pack
Catalog Number: 470332-442
Supplier: Ward's Science
81 - 96 of 111