Print…

You Searched For: Presses

Manual or powered laboratory presses are suited to meet the many specimen preparation requirements or compressing procedures. Some powered styles come fully automated for the best working efficiency. Common applications include drying and flattening samples for botanical collecting, preparing powdered materials into tablet forms for use in calorimeter tests, pellet pressing, compression strength tests, and fluid extractions. The presses are ideal for research, compacting, molding rubber or plastic, laminating, and ceramics applications.

Manual or powered laboratory presses are suited to meet the many specimen preparation requirements or compressing procedures. Some powered styles come fully automated for the best working efficiency. Common applications include drying and flattening samples for botanical collecting, preparing powdered materials into tablet forms for use in calorimeter tests, pellet pressing, compression strength tests, and fluid extractions. The presses are ideal for research, compacting, molding rubber or plastic, laminating, and ceramics applications.


111  results were found

Refine Results Sort by

Sort Results

List View Easy View (new)
SearchResultCount:"111"

Rate These Search Results

Product Image-53881-007

Electric Hot Plate Set

Description: For use with standard laboratory presses (53880-048, -050, -054; 29999-800, -806). Incorporates a top and bottom aluminum hot plate. 15.2cm plates have individual temperature controllers and thermometers. Provide heat from 65.6[degree] to 260[degree]C. For 115V operation.
Catalog Number: 53881-007
Supplier: Carver
Product Image-15566-212

Stainless Steel Pellets

Description: Replacement pellets for use with Evacuable Powdered Sample Briquetting Dies. 32mm briquette diameter.
Catalog Number: 15566-212
Supplier: Chemplex
Product Image-89079-864

Evacuable Die Set

Description: Stainless steel die set for XRF sample analysis. Usable with laboratory presses. Consists of base, main cylindrical body, two optically polished stainless steel pellets, plunger, collection up and O-rings. Maximum force indicated on each die set. Produces 13mm IR sample pellets.
Catalog Number: 89079-864
Supplier: Chemplex
Product Image-76579-270

TAMPER HEATED 8X8MM

Catalog Number: 76579-270
Supplier: Mortech Manufacturing
Product Image-470332-430

MINI PLANT PRESS - 5 X 8"

Description: MINI PLANT PRESS - 5 X 8"
Catalog Number: 470332-430
Supplier: Ward's Science
Product Image-470332-444

Plant Press Blotter Dryer Sheet - 5 x 8" 100 pack

Description: Plant Press Blotter Dryer Sheet - 5 x 8" 100 pack
Catalog Number: 470332-444
Supplier: Ward's Science
Product Image-470332-452

Plant Press Blotter Dryer Sheet - 3 x 5" 100 pack

Description: Plant Press Blotter Dryer Sheet - 3 x 5" 100 pack
Catalog Number: 470332-452
Supplier: Ward's Science
Product Image-76182-386

Evacuable Pellet Die Set, 31mm

Description: Evacuable Pellet Die Set, standard sample disks for XRF, includes evacuable die body, base, plunger, two 31 mm polished steel pellets (3623ST), O-ring vacuum seals, and knock-out ring for sample disk extraction, Compatible
Catalog Number: 76182-386
Supplier: SPEX
Product Image-76181-894

Evacuable Pellet Die Set 40mm

Description: Evacuable Pellet Die Set, Ideal for pressing KBr disks for IR analysis, Set includes evacuable die body, base, plunger, two 40 mm polished steel pellets, O-ring vacuum seals and knock-out ring for sample disk extraction, Loa
Catalog Number: 76181-894
Supplier: SPEX
Product Image-76579-272

HEATED TAMPER 16X16MM

Catalog Number: 76579-272
Supplier: Mortech Manufacturing
Product Image-76181-906

Evacuable Pellet Die Set 35 mm

Description: Evacuable Pellet Die Set, Ideal for pressing sample disks for XRF analysis, Load limit: 50 tons (45.4 metric tons), includes evacuable die body, base, plunger, two 35 mm polished steel pellets, O-ring vacuum seals and knock
Catalog Number: 76181-906
Supplier: SPEX
Product Image-76181-896

Pellet Tungsten Carbide 40mm

Description: Pellet Tungsten Carbide, Replacement or spare 40 mm polished, for Evacuable Pellet Die Set, Ideal for routine pressing of abrasive materials, Harder than steel pellets, Polished face of pellet ensures a flat analytical surfac
Catalog Number: 76181-896
Supplier: SPEX
Product Image-76181-912

Sleeve-and-Plunger Set for Evacuable Pellet Die Set 35mm

Description: Sleeve-and-Plunger Set, Ideal for smaller amounts (<1 g) of analyte, Used with 35mm Evacuable Pellet Die Set and any PrepAid* sample binder, Allows easy preparation of XRF disks with binder matrix
Catalog Number: 76181-912
Supplier: SPEX
Product Image-76181-910

Pellet steel 35mm

Description: Pellet steel, polished for use with Evacuable Pellet Die Set, Polished face of pellet ensures a flat analytical surface on thesample disk, Made with a close tolerance and sharp edges so that sample powderwill not feather into the gap be
Catalog Number: 76181-910
Supplier: SPEX
Product Image-76181-890

Evacuable Pellet Die Set 13 mm

Description: Evacuable Pellet Die Set, Ideal for pressing KBr disks for IR analysis, includes evacuable die body, base, plunger, two 13 mm polished steel pellets, O-ring vacuum seals, and knock-out ring for sample disk extraction, Load
Catalog Number: 76181-890
Supplier: SPEX
Product Image-76181-898

Pellet steel 40mm

Description: Pellet steel, polished for use with Evacuable Pellet Die Set, Polished face of pellet ensures a flat analytical surface on thesample disk, Made with a close tolerance and sharp edges so that sample powderwill not feather into the gap be
Catalog Number: 76181-898
Supplier: SPEX
65 - 80 of 111