You Searched For: STERIS NV/SA

Designed to replace the water in standard baths, the thermal metallic beads transfer heat to contained materials without the risk of splashing or evaporating. The dry balls are naturally less susceptible to microbial growth than fluids, and therefore are less likely to contaminate procedures by housing organisms. With a uniform shape, the metallic beads conform to the contained materials and evenly distribute heat to prevent distorted data.

Designed to replace the water in standard baths, the thermal metallic beads transfer heat to contained materials without the risk of splashing or evaporating. The dry balls are naturally less susceptible to microbial growth than fluids, and therefore are less likely to contaminate procedures by housing organisms. With a uniform shape, the metallic beads conform to the contained materials and evenly distribute heat to prevent distorted data.


31  results were found

Sort Results

List View Easy View (new)
SearchResultCount:"31"
Description: Grinding Ball, Replacement, High durability and efficiency with moderate resistance to abrasion, Resists chemical attack, Typical composition: Major Elements - Fe, Cr; Minor Elements - Ni, Mn, S, Si, Made of type 440C stain
Catalog Number: 76181-860
Supplier: SPEX


Catalog Number: 76533-064
Supplier: SPEX


Catalog Number: 76533-146
Supplier: SPEX


Catalog Number: 76182-348
Supplier: SPEX


Description: Grinding Ball Stainless Steel, made of 440C stainless steel. Used with grinding Ball Dispenser and all 96-well titer plates, Suitable for grinding small tissue samples in the Geno/Grinder, Autoclavable and r
Catalog Number: 76182-134
Supplier: SPEX


Description: Made of high-density aluminum. Ball diameter: 12.7mm. For use with grinding mills.
Catalog Number: 48906-647
Supplier: US Stoneware


Catalog Number: MSPP-11079132S
Supplier: BIOSPEC PRODUCTS MS


Description: This ball is for use in the MM 200 mixer mill (14213-032). Composition is approximately 84.5% Fe, 13% Cr. Approximate density is 7700kg/m3.
Catalog Number: 14214-654
Supplier: Retsch


Description: This ball is for use in the MM 200 mixer mill (14213-032). Composition is approximately 99.9% SiO2. Degree of hardness of 7 Mohs. Approximate density is 2600kg/m3.
Catalog Number: 14213-170
Supplier: Retsch


Description: This ball is for use in the MM 200 mixer mill (14213-032). Composition is approximately 84.5% Fe, 13% Cr. Approximate density is 7700kg/m3.
Catalog Number: 14213-178
Supplier: Retsch


Description: This ball is for use in the MM 200 mixer mill (14213-032). Composition is approximately 84.5% Fe, 13% Cr. Approximate density is 7700kg/m3.
Catalog Number: 14214-612
Supplier: Retsch


Description: This ball is for use in the MM 200 mixer mill (14213-032). Composition is approximately 84.5% Fe, 13% Cr. Approximate density is 7700kg/m3.
Catalog Number: 14214-652
Supplier: Retsch


49 - 31 of 31