You Searched For: Manifolds

These sampling manifolds are available in a variety of different configurations and various lengths. Almost all manifolds are fabricated from borosilicate glass, and a range of port options allow flexibility in a number of samples and connection locations. Some models allow for rapid purging of gas for releasing pressure or creating a vacuum. Stopcocks have metering groove cuts in the plug to provide fine control of vacuum sources and inert gases.

These sampling manifolds are available in a variety of different configurations and various lengths. Almost all manifolds are fabricated from borosilicate glass, and a range of port options allow flexibility in a number of samples and connection locations. Some models allow for rapid purging of gas for releasing pressure or creating a vacuum. Stopcocks have metering groove cuts in the plug to provide fine control of vacuum sources and inert gases.


112  results were found

Sort Results

List View Easy View (new)
SearchResultCount:"112"
Description: Vacuum/gas manifold with a Firestone rapid purge valve at one end and 0–5 mm high vacuum, Easy-Action PTFE stopcock ports with 3/8" O.D
Catalog Number: 89064-018
Supplier: Ace Glass

Small Business Enterprise Product available on GSA Advantage®


Description: These manifolds are used to connect inert gas and vacuum sources to sidearm stopcocks (three-place, four-place or five-place manifolds). Which is manufactured from 33 expansion, low extractable borosilicate glass.
Catalog Number: KT216140-0003
Supplier: DWK Life Sciences (KIMBLE)


Description: Provides automated processing of SPE and SLE cartridges
Catalog Number: 10047-070
Supplier: Thermo Scientific


Description: Designed by Dr. Raymond Firestone, this rapid and efficient purge valve is designed to allow 100% replacement of air in reaction vessels with any desired gas. No mercury is used, no reducing valve is needed on the gas source, and no high-vacuum source is required. The valve also eliminates the need to watch manometers, hand-control gas flow, or install warning systems. Expensive gases are conserved as the flow can be cut to nearly zero when purging is complete. This economic valve makes it possible to run all reactions under nitrogen.
Catalog Number: 89084-888
Supplier: Ace Glass

Small Business Enterprise Product available on GSA Advantage®


Description: Water-distribution manifold allows coolant from a single source to be evenly distributed to up to five condensers and then recombines the flow to one outlet pipe.
Catalog Number: 47800-070
Supplier: Heidolph NA, LLC


Description: Use to tip-off NMR tubes
Catalog Number: 89063-764
Supplier: Ace Glass

Small Business Enterprise Product available on GSA Advantage®


Description: Air sampling tee is fabricated from borosilicate glass.
Catalog Number: 89059-190
Supplier: Ace Glass

Small Business Enterprise Product available on GSA Advantage®


Description: The no.15 o-ring joint connections at each end
Catalog Number: 89084-242
Supplier: Ace Glass

Small Business Enterprise Product available on GSA Advantage®


Description: The no.15 o-ring joint connections at each end
Catalog Number: 89084-304
Supplier: Ace Glass

Small Business Enterprise Product available on GSA Advantage®


Description: Used to connect inert gas and vacuum sources
Catalog Number: KT216060-0000
Supplier: DWK Life Sciences (KIMBLE)


Description: Greaseless, vacuum/gas manifold with 0 - 4 mm high vacuum and Easy-Action three-way PTFE stopcocks for takeoffs
Catalog Number: 89085-060
Supplier: Ace Glass

Small Business Enterprise Product available on GSA Advantage®


Description: A pressure relief manifold for a jacketed, reaction vessel is designed to protect the vessel from breakage while isolated or disconnected from the circulator
Catalog Number: 89097-262
Supplier: Ace Glass

Small Business Enterprise Product available on GSA Advantage®


Description: Glass Manifold with #15 Ace-Thred at either end to allow switching vacuum connection to left or right side
Catalog Number: 89063-780
Supplier: Ace Glass

Small Business Enterprise Product available on GSA Advantage®


Description: The no.15 o-ring joint connections at each end
Catalog Number: 89084-324
Supplier: Ace Glass

Small Business Enterprise Product available on GSA Advantage®


Description: With a spherical 35/20 ball joint connections at each end
Catalog Number: 89084-268
Supplier: Ace Glass

Small Business Enterprise Product available on GSA Advantage®


Description: This greaseless vacuum line is fabricated from Ace-Threds and Easy-Action PTFE stopcocks
Catalog Number: 89063-718
Supplier: Ace Glass

Small Business Enterprise Product available on GSA Advantage®


-31 - -16 of 112