Print…

You Searched For: Chemical Fume Hoods

Designed to guarantee laboratory conditions and researchers remain safe at all times, the chemical fume hoods protect against flammable or toxic chemicals. These protection devices have clear sashes that slide horizontally or vertically into place and support high working visibility. Constructed for maximum chemical resistance, the leak-proof enclosures will not corrode even with heavy routine use and corrosive spills. The chemical fume hoods circulate and filter air to eliminate possible vapors produced.

Designed to guarantee laboratory conditions and researchers remain safe at all times, the chemical fume hoods protect against flammable or toxic chemicals. These protection devices have clear sashes that slide horizontally or vertically into place and support high working visibility. Constructed for maximum chemical resistance, the leak-proof enclosures will not corrode even with heavy routine use and corrosive spills. The chemical fume hoods circulate and filter air to eliminate possible vapors produced.


534  results were found

Refine Results Sort by

Sort Results

List View Easy View (new)
SearchResultCount:"534"

Rate These Search Results

Product Image-76045-932

Work Surfaces for Protector ClassMate Hood 4 feetx25.88in

Description: Work Surfaces for Protector ClassMate Hood, Dimensions: 4 feetx25.88in, Molded of corrosion-resistant epoxy resins, 1.5in diameter holes for venting and 2.5in diameter holes for plumbing, Left side/Right rear pre-cut 6inx3in oval cutouts
Catalog Number: 76045-932
Supplier: Labconco

Product available on GSA Advantage®


Product Image-10769-480

Work Surface

Description: SpillStopper Work Surface, 6 ft w x 36in d, with cupsink cutout, left side, interior of Protector Hoods. Pre-drilled 1. 5in diameter holes for venting and 2. 5in diameter holes for plumbing. Pre-cut 6inx3in oval cupsink cutout optional. Cupsink separate
Catalog Number: 10769-480
Supplier: Labconco

Product available on GSA Advantage®


Product Image-76045-686

Work Surfaces for Protector ClassMate Hood 6 feetx25.88in

Description: Work Surfaces for Protector ClassMate Hood, Dimensions: 6 feetx25.88in, Molded of corrosion-resistant epoxy resins, 1.5in diameter holes for venting and 2.5in diameter holes for plumbing, Left/Right side pre-cut 6inx3in oval sink cutouts
Catalog Number: 76045-686
Supplier: Labconco

Product available on GSA Advantage®


Product Image-10769-470

Work Surface

Description: SpillStopper Work Surface, 3 ft w x 36in d, with cupsink cutouts, left and right rear, interior of Protector Hoods. Pre-drilled 1. 5in diameter holes for venting and 2. 5in diameter holes for plumbing. Pre-cut 6inx3in oval cupsink cutout optional. Cupsink separate
Catalog Number: 10769-470
Supplier: Labconco

Product available on GSA Advantage®


Product Image-76045-664

Work Surfaces for Protector ClassMate Hood 4 feetx25.88in

Description: Work Surfaces for Protector ClassMate Hood, Dimensions: 4 feetx25.88in, Molded of corrosion-resistant epoxy resins, 1.5in diameter holes for venting and 2.5in diameter holes for plumbing, Left/Right rear pre-cut 6inx3in oval sink cutouts
Catalog Number: 76045-664
Supplier: Labconco

Product available on GSA Advantage®


Product Image-10769-388

Work Surface

Description: SpillStopper Work Surface, 4 ft w x 36in d, with cupsink cutouts, left rear and right side. Pre-drilled 1. 5in diameter holes for venting and 2. 5in diameter holes for plumbing. Pre-cut 6inx3in oval cupsink cutout optional. Cupsink separate. Interior of Protector Hood
Catalog Number: 10769-388
Supplier: Labconco

Product available on GSA Advantage®


Product Image-10769-398

Work Surface

Description: SpillStopper Work Surface, 36. 0in deep, 5 ft, Right rear cupsink cutout, Dimensions: 60. 0in w x 36. 0in d x 1. 25in h, Pre-drilled 1. 5in diameter holes for venting and 2. 5in diameter holes for plumbing. Cupsink separate, interior of Protector Hood
Catalog Number: 10769-398
Supplier: Labconco

Product available on GSA Advantage®


Product Image-10769-476

Work Surface

Description: SpillStopper Work Surface, 6 ft w x 36in d, no cutouts, interior of Protector Hoods. Pre-drilled 1. 5in diameter holes for venting and 2. 5in diameter holes for plumbing. Pre-cut 6inx3in oval cupsink cutout optional. Cupsink separate
Catalog Number: 10769-476
Supplier: Labconco

Product available on GSA Advantage®


Product Image-10769-446

Work Surface

Description: SpillStopper Work Surface, 5 ft w x 36in d, with cupsink cutouts, left and right rear, interior of Protector Hoods. Pre-drilled 1. 5in diameter holes for venting and 2. 5in diameter holes for plumbing. Pre-cut 6inx3in oval cupsink cutout optional. Cupsink separate
Catalog Number: 10769-446
Supplier: Labconco

Product available on GSA Advantage®


Product Image-10769-396

Work Surface

Description: SpillStopper Work Surface, 5 ft w x 36. 0in d, No cupsink cutout, Pre-drilled 1. 5in diameter holes for venting and 2. 5in diameter holes for plumbing. Pre-cut 6inx3in oval cupsink cutout optional. Cupsink separate, interior of Protector Hood
Catalog Number: 10769-396
Supplier: Labconco

Product available on GSA Advantage®


Product Image-10769-462

Work Surface

Description: SpillStopper Work Surface, 3 ft w x 36in d, no cutouts, interior of Protector Hoods. Pre-drilled 1. 5in diameter holes for venting and 2. 5in diameter holes for plumbing. Pre-cut 6inx3in oval cupsink cutout optional. Cupsink separate
Catalog Number: 10769-462
Supplier: Labconco

Product available on GSA Advantage®


Product Image-10769-434

Work Surface

Description: SpillStopper Work Surface, 3 ft w x 36in d, with cupsink cutouts, left and right side, interior of Protector Hoods. Pre-drilled 1. 5in diameter holes for venting and 2. 5in diameter holes for plumbing. Pre-cut 6inx3in oval cupsink cutout optional. Cupsink separate
Catalog Number: 10769-434
Supplier: Labconco

Product available on GSA Advantage®


Product Image-10769-410

Work Surface

Description: SpillStopper Work Surface, 36. 0in deep, 6 ft, Left and right rear cupsink cutouts, Dimensions: 60. 0in w x 36. 0in d x 1. 25in h, Pre-drilled 1. 5in diameter holes for venting and 2. 5in diameter holes for plumbing. Cupsink separate, interior of Protector Hood
Catalog Number: 10769-410
Supplier: Labconco

Product available on GSA Advantage®


Product Image-76045-678

Work Surfaces for Protector ClassMate Hood 5 feetx25.88in

Description: Work Surfaces for Protector ClassMate Hood, Dimensions: 5 feetx25.88in, Molded of corrosion-resistant epoxy resins, 1.5in diameter holes for venting and 2.5in diameter holes for plumbing, Left rear/Right side pre-cut 6inx3in oval cutouts
Catalog Number: 76045-678
Supplier: Labconco

Product available on GSA Advantage®


Product Image-10769-406

Work Surface

Description: SpillStopper Work Surface, 36. 0in deep, 6 ft, Right side cupsink cutout. Not for use with Protector Solvent Storage Cabinets. Pre-drilled 1. 5in diameter holes for venting and 2. 5in diameter holes for plumbing. Cupsink separate, interior of Protector Hood
Catalog Number: 10769-406
Supplier: Labconco

Product available on GSA Advantage®


Product Image-10769-414

Work Surface

Description: SpillStopper Work Surface, 36. 0in deep, 8 ft, Left rear and right side cupsink cutouts. Not for use with Protector Solvent Storage Cabinets. Pre-drilled 1. 5in diameter holes for venting and 2. 5in diameter holes for plumbing. Cupsink separate, interior of Protector Hood
Catalog Number: 10769-414
Supplier: Labconco

Product available on GSA Advantage®


113 - 128 of 534