Print…

You Searched For: Chemical Fume Hoods

Designed to guarantee laboratory conditions and researchers remain safe at all times, the chemical fume hoods protect against flammable or toxic chemicals. These protection devices have clear sashes that slide horizontally or vertically into place and support high working visibility. Constructed for maximum chemical resistance, the leak-proof enclosures will not corrode even with heavy routine use and corrosive spills. The chemical fume hoods circulate and filter air to eliminate possible vapors produced.

Designed to guarantee laboratory conditions and researchers remain safe at all times, the chemical fume hoods protect against flammable or toxic chemicals. These protection devices have clear sashes that slide horizontally or vertically into place and support high working visibility. Constructed for maximum chemical resistance, the leak-proof enclosures will not corrode even with heavy routine use and corrosive spills. The chemical fume hoods circulate and filter air to eliminate possible vapors produced.


50  results were found

Refine Results Sort by
SearchResultCount:"50"

Sort Results

List View Easy View (new)

Rate These Search Results

Product Image-89523-282

Protector® Stainless Steel Perchloric Acid Laboratory Hoods, Labconco®

Supplier: Labconco
Description: Interior is one piece, Type 316 stainless steel with integral work surface and drainage trough.

Product available on GSA Advantage®

Product Image-CF5-1372-03

REDISHIP Auxiliary Air Chambers, Kewaunee®

Supplier: Kewaunee
Description: These chambers can be added to the top of any Supreme Air fume hood to convert it to an auxiliary air fume hood.

Product available on GSA Advantage®

Product Image-15202-652

Cupsink and Turret Kit for Basic™ Laboratory Hoods, Labconco®

Supplier: Labconco
Description: Kit includes a 7.6x15.2cm (3x6") polypropylene cupsink and chrome turret

Product Image-10769-392

SpillStopper Work Surfaces, Labconco

Supplier: Labconco
Description: SpillStopper Work Surfaces are molded from a special formulation of corrosion-resistant epoxy resins

Product available on GSA Advantage®

Product Image-10002-752

AtmoSense™ Oxygen Monitor, 115 V

Catalog Number: (10002-752)
Supplier: Labconco
Description: The AtmoSense™ Oxygen monitor is designed for general purpose trace oxygen detection as low as 1 ppm.

Product available on GSA Advantage®


Product Image-76045-932

SpillStopper™ Work Surfaces for Protector® ClassMate™ Laboratory Hoods, Labconco®

Supplier: Labconco
Description: Solid epoxy work surfaces are 3.2cm (1<sup>1</sup>/<sub>4</sub>") thick, 65.7cm (25<sup>7</sup>/<sub>8</sub>") deep, and dished to contain spills.

Product available on GSA Advantage®

Product Image-VF5-0208-A1

REDISHIP Supreme Air® Fume Hood Worktops, Kewaunee®

Supplier: Kewaunee
Description: These modified epoxy resin worktops are available with or without a 5.1cm (2") diameter vent hole

Product available on GSA Advantage®

Product Image-89233-240

Guardian™ Airflow Monitor, Labconco®

Catalog Number: (89233-240)
Supplier: Labconco
Description: Guardian Airflow Monitors are designed to continuously monitor airflow through Labconco fume hoods

Product available on GSA Advantage®


Product Image-30140-226

Basic™ 47 and Basic 70 Laboratory Hoods, Labconco®

Supplier: Labconco
Description: The Basic™ hood is ideal for rooms with ceilings below 2.4 m, 8" and for shallow countertops.

Product available on GSA Advantage®

Product Image-89232-772

Protector® Premier® Laboratory Hoods, Labconco®

Supplier: Labconco
Description: Labconco Protector® Premier® fiberglass fume hoods have a one-piece liner of specially-formulated, fiberglass-reinforced polyester, which offers corrosion and fire resistance and easy clean up.

Environmentally Preferable Product available on GSA Advantage®

Product Image-10222-140

Protector® XL™ Floor-Mounted Laboratory Hoods with Vertical Sashes, Labconco

Supplier: Labconco
Description: Testing confirms the Protector XL floor-mounted laboratory hoods with vertical-rising sashes meet the SEFA-1 standard of a low velocity, high performance hood and may be operated as low as 60 fpm.

Environmentally Preferable CSA Certified Product available on GSA Advantage®

Product Image-10118-530

Protector® PVC Perchloric Acid and Acid Digestion Laboratory Hoods, Labconco®

Supplier: Labconco
Description: Recommended whenever perchloric acid is used in combination with other corrosive inorganic reagents.

Product available on GSA Advantage®

Product Image-76045-914

Protector® ClassMate™ Laboratory Hoods, Labconco®

Supplier: Labconco
Description: ClassMate™ laboratory hoods are designed to meet the needs of instructional laboratories.

UL Listed Environmentally Preferable CSA Certified Product available on GSA Advantage®

Product Image-97044-330

Guardian™ 500 Airflow Monitor with Epoxy-Coated Steel Casing, Labconco®

Supplier: Labconco
Description: The Guardian 500 Airflow Monitor is designed to continuously monitor airflow through Labconco fume hoods and other enclosures

Product available on GSA Advantage®

Product Image-30192-104

Canopy Hood, Labconco®

Supplier: Labconco
Description: Specifically designed to solve unique ventilation problems, this canopy hood vents nontoxic materials such as heat, steam, and odors from large or bulky equipment.

Product available on GSA Advantage®

Product Image-470020-402

Basic 47 and 70 Fume Hoods

Supplier: Labconco
Description: Ideal for rooms with shallow countertops or ceilings below 8', these hoods are constructed of sturdy, epoxy-coated steel both inside and out.<BR><BR>Furnished with a 3/16" tempered safety glass counterbalanced sash and duct collar, the hoods ensure your students’ safety. A removable front panel and air foil, vapor-proof interior light, and two-piece adjustable baffle make for easy access and convenient use.<BR><BR>The right side fixture is factory prepared to accept up to three service fixtures, one duplex electrical receptacle, and air monitor. The side wall is factory prepared for a wall-mounted cupsink with turret. Hoods are available in two model types – Basic 47 Hoods with a 4' nominal width are designed as an individual lab station, <BR><BR>Basic 70 Hoods are 6' in width and spacious enough to accomodate numerous samples or workstations.<BR><BR>Both models are available with or without a blower. Blowers may be mounted in or above the hood, or on the roof. Basic 47 hoods that include a blower have a 3/4 hp motor. <BR><BR>Note: Worksurface, base cabinet, and blower are required for operation, and sold separately.<BR><BR>For assistance, contact your local sales representative

Inquire for Price
Stock for this item is limited, but may be available in a warehouse close to you. Please make sure that you are logged in to the site so that available stock can be displayed. If the call is still displayed and you need assistance, please call us at 1-800-932-5000.
Stock for this item is limited, but may be available in a warehouse close to you. Please make sure that you are logged in to the site so that available stock can be displayed. If the call is still displayed and you need assistance, please call us at 1-800-932-5000.
In order to process your orders without delay, we request that you provide the required business documentation to purchase this product.

To order chemicals, medical devices, or other restricted products please provide identification that includes your business name and shipping address via email CMD_NA@vwr.com or fax 484.881.5997 referencing your VWR account number . Acceptable forms of identification are:

  • State issued document with your organization's Federal Tax ID Number
  • State issued document with your organization's Resale Tax ID Number
  • City or County issued Business License
  • State Department of Health Services License
  • Any other ID issued by the State that includes the business name and address

* Please note if your account is within the State of California two of these pieces of identification will be required.
VWR will not lift restrictions for residential shipping addresses.

-Additional Documentation May be needed to purchase this item. A VWR representative will contact you if needed.
This product has been blocked by your organization. Please contact your purchasing department for more information.
The original product is no longer available. The replacement shown is available.
This product is no longer available. Alternatives may be available by searching with the VWR Catalog Number listed above. If you need further assistance, please call VWR Customer Service at 1-800-932-5000.
17 - 32 of 50
no targeter for Bottom