Print…

You Searched For: WILMAD/LABGLASS


569  results were found

Refine Results Sort by

Sort Results

List View Easy View (new)
SearchResultCount:"569"

Rate These Search Results

Image Unavailable-76460-296

Rotor Set, With 5 Rotors, 10 Kel-F and 3 Torlon Cap, Temperature: -100 to 200 Degree C, 1X Rotor, Vmax =18 kHz, Most homogeneous ceramic material structure, Zirconia Rotor Body has higher strength (1,000 MPa, greater than Si3N4), Highest spinning speed, High precision superior finish

Description: Rotor Set, With 5 Rotors, 10 Kel-F and 3 Torlon Cap, Temperature: -100 to 200 Degree C, 1X Rotor, Vmax =18 kHz, Most homogeneous ceramic material structure, Zirconia Rotor Body has higher strength (1,000 MPa, greater than Si3N4), Highest spinning speed, High precision superior finish
Catalog Number: 76460-296
Supplier: Wilmad-LabGlass
Product Image-76449-890

Spinner Turbine, for Bruker Systems, Room Temperature Use, Color: Blue, Causes less probe insert damage by better insert sample control, Tachometer strip now with foil protection for improved life span, Can be mixed with originals during sample changer operation, Dimension: 5mm

Description: Spinner Turbine, for Bruker Systems, Room Temperature Use, Color: Blue, Causes less probe insert damage by better insert sample control, Tachometer strip now with foil protection for improved life span, Can be mixed with originals during sample changer operation, Dimension: 5mm
Catalog Number: 76449-890
Supplier: Wilmad-LabGlass
Product Image-14207-580

Bottle, Gas Washing, Tall Form, with Fritted Disc

Description: Capacity: 1000mL, Joint Size: [ST] 40/35; Porosity: Coarse. Manufactured with inlet tube sealed through center of fritted glass disc. Inlet tube extends nearly to base of bottle.
Catalog Number: 14207-580
Supplier: Wilmad-LabGlass
Product Image-14203-970

Reaction Vessel Lid, Conical Flange, 4-Neck

Description: Flange Inside Diameter: 4"; Center Neck: [ST] 24/40; Side Necks: [ST] 24/40. Supplied with center neck and three side necks that are 120[degrees] apart. Bottom of lid is flat ground conical flange. Neck ID is also flange size.
Catalog Number: 14203-970
Supplier: Wilmad-LabGlass
Product Image-14209-824

GENERATOR ARSINE COMP

Catalog Number: 14209-824
Supplier: Wilmad-LabGlass
Image Unavailable-76459-710

NMR Sample Tube, Thin Wall Precision Quick Pressure Valve, specially designed to simplify the work of NMR/EPR studies for catalysis, gas-liquid phase reactions, air sensitive samples and elevated temperature studies using low boiling point solvents, 500MHZ, Size: 5mmx7in Long

Description: NMR Sample Tube, Thin Wall Precision Quick Pressure Valve, specially designed to simplify the work of NMR/EPR studies for catalysis, gas-liquid phase reactions, air sensitive samples and elevated temperature studies using low boiling point solvents, 500MHZ, Size: 5mmx7in Long
Catalog Number: 76459-710
Supplier: Wilmad-LabGlass
Image Unavailable-76459-916

EPR Sample Tube, Thin Wall Precision Quartz, hold 10-15 times tighter tolerance on inner diameter, and >5 times smaller camber and concentricity over Economy Brand tube. Precision tubes are recommended for cw-experiment that require a constant filling factor or reproducibility, Size: 3mmx6.25in l

Description: EPR Sample Tube, Thin Wall Precision Quartz, hold 10-15 times tighter tolerance on inner diameter, and >5 times smaller camber and concentricity over Economy Brand tube. Precision tubes are recommended for cw-experiment that require a constant filling factor or reproducibility, Size: 3mmx6.25in l
Catalog Number: 76459-916
Supplier: Wilmad-LabGlass
Image Unavailable-76460-292

Rotor Set, With 2 Kel-F and 1 Torlon Cap, Temperature: -100 to 200 Degree C, 1X Rotor, 2X Kel-F Caps and 1X Torlon Cap, Vmax =18 kHz, Most homogeneous ceramic material structure, Rotor Body has higher strength (1,000 MPa, greater than Si3N4), Highest spinning speed, High precision superior finish

Description: Rotor Set, With 2 Kel-F and 1 Torlon Cap, Temperature: -100 to 200 Degree C, 1X Rotor, 2X Kel-F Caps and 1X Torlon Cap, Vmax =18 kHz, Most homogeneous ceramic material structure, Rotor Body has higher strength (1,000 MPa, greater than Si3N4), Highest spinning speed, High precision superior finish
Catalog Number: 76460-292
Supplier: Wilmad-LabGlass
Product Image-14206-454

COLUMN CHROM 10.5X250MM

Catalog Number: 14206-454
Supplier: Wilmad-LabGlass
Product Image-14204-876

Reaction Vessel, Cylindrical, Flat Flange

Description: Capacity: 2000mL; Flange Diameter: 6-5/8". Cylindrical reaction vessel with tooled flat flange.
Catalog Number: 14204-876
Supplier: Wilmad-LabGlass
Image Unavailable-76459-948

EPR Sample Tube, Thin Wall Precision, hold 10-15 times tighter tolerance on the inner diameter, and >5 times smaller camber and concentricity over Economy Brand tube. Precision tubes are recommended for cw-experiments require a constant filling factor or reproducibility on volume, Size: 5mmx7 in l

Description: EPR Sample Tube, Thin Wall Precision, hold 10-15 times tighter tolerance on the inner diameter, and >5 times smaller camber and concentricity over Economy Brand tube. Precision tubes are recommended for cw-experiments require a constant filling factor or reproducibility on volume, Size: 5mmx7 in l
Catalog Number: 76459-948
Supplier: Wilmad-LabGlass
Product Image-76460-184

Sample Tube, NMR Economy, without Cap, High-Throughput, Wall Thickness: 0.27 mm, With the steady increase of SNR on NMR spectrometers, the trend of small volume testing fits in high-throughput NMR to save on solvent costs, Diameter: 3.0 +/- 0.03, Dimension: 3mm, 4inch

Description: Sample Tube, NMR Economy, without Cap, High-Throughput, Wall Thickness: 0.27 mm, With the steady increase of SNR on NMR spectrometers, the trend of small volume testing fits in high-throughput NMR to save on solvent costs, Diameter: 3.0 +/- 0.03, Dimension: 3mm, 4inch
Catalog Number: 76460-184
Supplier: Wilmad-LabGlass
Product Image-14200-980

DIST COL HEMPEL 25X300 29/42

Catalog Number: 14200-980
Supplier: Wilmad-LabGlass
Product Image-14008-130

SPRAYER TLC COMP 250ML

Catalog Number: 14008-130
Supplier: Wilmad-LabGlass
Product Image-14204-962

TUBE CENT OIL 100ML

Catalog Number: 14204-962
Supplier: Wilmad-LabGlass
Product Image-14203-668

Stirrer Bearing, Precision, PTFE, Complete, 10mm

Description: Joint Size: [ST] 24/40. Self-aligning precision stirrer bearing. For use with polished 10mm OD stirrer shafts. Complete assembly includes PTFE stirrer bearing, PTFE bushing, saddle O-ring, threaded heavy wall glass adapter and top screw cap.
Catalog Number: 14203-668
Supplier: Wilmad-LabGlass
177 - 192 of 569